Brakes
Brakes
Cassette
Chain
Crankset
Derailleur
Frame
Handlebar and Seat Post
Headset
Hub
Pedals
Tires
Wheels
Where's the problem?
Roll over the menu to the left to find the area of your bike that needs attention.
Click on the menu option to see great articles that can help you.
Repair Help
Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
141-150 of 180 Articles Found
Chain Tension for Tandem Front End
This article will discuss sizing the captain-to-stoker chain for tandems, called the "primary" chain. This is the chain that connects the front rings to the back rings. Setting chain tension will also be discussed.
1951-15 Adapter Stud Installation for PRS-15
This article demonstrates how to disassemble your PRS-15 repair stand to replace the original 100-15X clamp with the 100-25D micro-adjust clamp using the 1951-15 adapter stud.
BMX Freestyle Detangler Adjustment
This article will discuss the "detangler" headset and brake system. The detangler is a linkage system used on BMX freestyle bikes that allow the front wheel and bars to rotate 360 degrees without the brake cables tangling or wrapping around the stem (See Figure 1).
Inner Tube Repair Video
How to fix a flat on a bicycle inner tube, using a pre-glued patch or vulcanizing patch.
MTB Positioning Chart
This article will describe the use of the MTB Positioning Chart for competitive mountain bicycles. A similar article for road bikes is at Road Bike Positioning.
Tubeless Tire Removal and Installation Video
This article will discuss removal and installation of tubeless tires.
Guide to Replacement Clamp Jaw Covers
This article will review the replacement jaw covers available for Park Tool repair stands. There are several jaw covers available depending upon the model and generation of your stand. It is best to inspect your clamp and then compare it to the jaw covers here. All jaw covers come as a complete pair with fasteners if applicable.
Crown Race Removal with the CRP-1 Crown Race Puller
This article with discuss the use of the CRP-1 Crown Race Puller. This tool has been replaced by the CRP-2.
Packing the Bike
This article will discuss the procedure for packing and boxing a bicycle for shipment. This often means taking apart various parts of the bicycle. Although disassembly is an inconvenience for reassembly, it makes for a well-protected bicycle during transport. The safe transport of the bike relies heavily upon the effort put into packing.
Tubeless Tire Conversion Video
This article will cover the process of converting a non-tubeless wheel to a tubeless system, including sealing the rim strip, installing the valve stem, and troubleshooting the installation of the tire.