Handlebar and Seat Post
Where's the problem?
Roll over the menu to the left to find the area of your bike that needs attention.
Click on the menu option to see great articles that can help you.
Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
1-10 of 19 Articles Found
INF-2 Troubleshooting Video
This article outlines common symptoms and fixes for the Park Tool INF-1 & INF-2 Shop Inflators.
PRS-33 & PRS-33.2 Annual Maintenance
This article will review some typical yearly maintenance procedures for your PRS-33 or PRS-33.2. These procedures should keep your stand in optimal shape during peak season and prevent larger problems down the road.
PRS-33 & PRS-33.2 Troubleshooting
This article outlines common symptoms and fixes for the Park Tool PRS-33 & PRS-33.2 Power Lift Shop Stands.
How to Center Park Tool Truing Stands Video
This article will discuss the calibration procedures for the TS-2, TS-2.2, TS-2.2P, TS-2.3, and TS-4.2 Professional Wheel Truing Stands. The same procedures and concepts apply to all stands.
Guide to Chain Tool Pin Replacement Video
This article will outline the proper usage of our chain tools, as well as the pin replacement process. Park Tool chain tools are designed to provide years of use for the professional and home mechanic. With proper use, the chain tool pin should also last a long time - however, it can break due to fatigue or improper use. The pin is replaceable and is available from your local retailer or from ParkTool.com.
Beam-Type Torque Wrench Use and Calibration
This article will discuss the use and calibration of beam-style torque wrenches such as the TW-1.2 and TW-2.2, as well as the TW-1 and TW-2 (discontinued).
TS-RK Rebuild Kit Installation Video
This article will discuss the installation of the TS-RK rebuild kit into TS-2, TS-2.2, and TS-2.3 Truing Stands.
PFP-6 and PFP-3 Service
This article will discuss the service of the PFP-6 Home Mechanic Floor Pump and the PFP-3 Floor Pump (both discontinued).
PFP-4 and PFP-2 Service
This article will discuss the service of the PFP-4 and PFP-2 Professional Floor Pump (both discontinued).
CBP-3 Puller Repair
This article will review the replacement of the pulling caliper finger part #1193-2 on the CBP-3. Bearings and cranks that are seized in place may exceed the strength of the caliper and this may cause the caliper to fail.