Home > Tools > Crank Tools > Crank Puller for Square Taper Cranks
F04703981a3196394de8bcc60942e33d50d80ecc_65x65
8701a3d56b5070ed32947886674bf32de103da76_65x65

Item # CCP-22

Crank Puller for Square Taper Cranks

The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks.

  • Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles
  • Also fits "Power Spline" cranks from SRAM using the 8mm thread bolt
  • Strong rotating tip system ensures smooth operation and long life.

NOTE: For cranks using the ISIS Drive or Octalink system, use the CCP-44 or the CWP-7.



Buy online or find a local retailer (North America only). International Distributors.
 

The CCP-22 or CWP-7 will pull cranks from spindes using the 8mm threaded bolt or nut. The large threading section of the tool is 22mm and threads into the arm. The inner thread of the tool will drive against the spindle and will drive the arm from the spindle. The 8mm thread is about the same size as the 8mm hex wrench shaft. Truvativ "Power Spline" spindes use an 8mm threaded bolt as does the common square spindles use an 8mm thread.


Common square spindle axle inside square hole of crank


8mm threaded bolt from the Truvativ Power Spline system