Shop Talk

A collection of mechanical musings, advice, news, and other interesting things from Park Tool.

  • 2011 Cycle Speedway World Championships

    Cycle Speedway is a type of bicycle racing that is not well known in the USA. It is an international sport, but Speedway creation stories all stem back to the United Kingdom. It consists of relatively short anaerobic races at outdoor facilities built for the purpose. The cinder track is absolutely flat and short, between 70–90 meters, and events are usually four laps long.

    Read More
  • To Fixie, or Not to Fixie... Why Not Some of Each With the SRAM® Torpedo® Hub?

    The article will review the service and installation of the SRAM® Torpedo® fix & free rear hub. Torpedo® branded hubs have a long history of coaster brake hub systems. SRAM® offers an interesting option in the Torpedo® fix & free hub. This hub allows freewheeling as any one-speed freewheel bike, but can then be adjusted without removing the wheel from the bike to a fixed gear option. The fixed-freewheel adjusting screw drives into the hub and displaces a carriage that frees a second set of internal locking pawls. This second set of pawls locks the rear cog from turning either direction.

    Read More
  • Pro Mechanic Eric Jellum reports from Asia

    One of the most enjoyable experiences of my job as the head mechanic of the Kelly Benefit Strategies - Optum Health Cycling Team is when the team travels to new exotic international races. For the first race of the year, the KBS - Optum Health squad visited Singapore for the OCBC criterium and also competed in the Jalajah Malaysia stage race. Along with the 6 riders traveling over to Asia there were 3 staff members supporting the racers.

    Read More
  • Eric Hawkins named Small Business Executive of the Year

    Park Tool President Eric Hawkins received a BRAINy award at the recent Bicycle Leadership Conference. Hawkins was chosen by the staff of Bicycle Retailer and Industry News as the Executive of the Year for small businesses in the cycling industry.

    Read More
  • Park Tool in Roubaix

    Some good shots on velonews.com of Park Tool equipment being used in Roubaix, France after the big Paris-Roubaix race April 10, 2011.

    Read More
  • Park Tool Company announces Tool Sharpening Service to the bicycle industry

    Park Tool now offers a sharpening service for cutting and machining tools. The facers, reamers and taps are the expensive part of the cutting tool system so extra care needs to be taken to ensure smooth cuts and long life. Dull cutters can produce poor results and waste time. Cutters that are regularly sharpened are faster, safer, easier to use and produce better results.

    Read More
  • iceBike Open House 2011

    Pictured in this article is our European Show Display. This booth features almost our entire product product line, and travels all over Europe attending consumer and trade shows in several different countries.

    Read More
  • Erik Jellum and the Kelly Benefit Strategies—Optum Health Early Season Work

    I have spent the past 2 weeks in Minneapolis, building bikes, organizing parts and working on the trailer. It has been a cold couple of days with the temperature never getting warmer than 10 below zero. Any work that needs to be done outside is done with haste as I'm afraid to lose a limb to frostbite. Luckily for me the team’s service course is big enough to take over the entire space to build bikes, and building bikes some how takes up a lot of real estate.

    Read More
  • Park Tool in Roatan

    While Park Tool's own Don Schoff was vacationing on the tiny island of Roatan, he wandered into Native Sons Dive Shop and found himself face to face with one of our PRS-4W-2 repair stands. Known for his TS-2.2 work, he also likely assembled this PRS-4W-2!

    Read More
  • Wind Tunnel Time for the Kelly Benefit Strategies—OptumHealth Pro Cycling

    It’s that time of year when Pro teams are sending the TT specialist to the wind tunnel to tweak their positions. Nowadays though, not only do the fast time trialist visit the wind tunnel but also GC riders will spend time working on their technique. The time spent in the wind tunnel is very valuable and even the smallest changes can pay off big with wins later on in the season. Not, only does the wind tunnel help the riders become more aero it’s also a great showcase for the teams sponsors to feature the newest equipment.

    Read More
Previous Page Next Page