Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
1-10 of 12 Articles Found
There are now several different crank bearing systems and standards. The different standards do not allow interchangeability between bearings or cranksets. Having some knowledge of the standard will help the mechanic be aware of service options.
This article reviews bearing removal and installation for PF30 press fit bottom brackets.
This article will discuss the removal and installation of the common cartridge bottom brackets of the three-piece cranksets.
This article will discuss the service of adjusting bottom bracket bearings. It will also review the types of tools required.
This article will review the service of the SRAM® PressFit GXP® and "Shimano® Press-Fit" threadless bottom bracket standards. These systems use a two-piece crank with a nominally 24mm diameter spindle.
This article will discuss the removal and installation of BB30 cartridge bottom bracket bearings.
The BB30 shell will accept adaptors to permit the installation of non-BB30 cranksets. This article covers service of BB30 adaptors for Campagnolo®, Shimano®, SRAM®, and more.
This article will review bottom bracket service for the Campagnolo® Power-Torque™ crankset.
This article will review the bearing service of the Campagnolo® and Fulcrum® Ultra-Torque™ cranksets. The service requires the use of the CBP-3 Campagnolo Bearing Puller and Installation Set. For crank installation and removal see Crank Removal and Installation: Ultra-Torque™.
This article will discuss use of the Park Tool BTS-1 and BFS-1 to perform various machining operations on bottom bracket shells.