Item # CRS-1
Crown Race Setting System
The CRS-1 offers a six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct insert then slide the tube over the fork tube and into the top end of the insert. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. The CRS-1 set includes one universal setting tube, three 1" inserts, and three 1-1/8" inserts. The CRS-1 will work on forks of 340mm column length or less.
For oversized column in 1-1/4" or 1-1/2" use the CRS-15 Crown Race Setter.
SHIS terminology: The CRS-1 services in SHIS sizes 26, 27, 30.
Where to BuyInternational Distributors|Online Retailers
North American Dealers
Related Repair Articles:
-
Crown Race Removal
This article with discuss the use of the CRP-1 Crown Race Puller. more
-
Threadless Headset Service
This article will discuss removing the old headset, installing and adjusting a new threadless headset more
-
Threaded Headset Service
This article will discuss removing the old headset, installing and adjusting a new threaded headset. more
-
Fork Crown Race Cutting and Facing
This article will discuss the machining of the fork crown seat. more
Follow Calvin's Corner:
Packed with hundreds of photos and procedures, the
Learn bicycle repair from your local bike shop in this hands-on clinic. Find a local Park Tool School or Learn More.
