Item # CBP-3
Campagnolo Bearing Puller and Installation Set
Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller’s forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system “pulls” the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.
NOTE: The C-clip on the crank spindle must be removed before the puller is installed and the bearing is removed.
Where to BuyInternational Distributors
North American Dealers
Related Repair Articles:
-
CBP-5 Crank and Bearing Adaptor Set for Service of Campagnolo Power Torque Cranks
This article will review the service of the Campagnolo® Power-Torque™ crank system. more
-
CBP Puller Repair
This article will review the replacement of the pulling caliper finger part #1193-2 on the CPB-3 (figure 1). Bearings... more
Follow Calvin's Corner:
Packed with hundreds of photos and procedures, the
Learn bicycle repair from your local bike shop in this hands-on clinic. Find a local Park Tool School or Learn More.
