Repair Help

Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).

131-140 of 179 Articles Found

New Bike Assembly

This article is a list of recommended procedures necessary for the assembly of a new bike from a bare frame to a completed bike.


Pedal Retention System and Cleats

This article will discuss the various foot retention options for the bicycle. The pedals of the bicycle accept the foot and shoe. The cyclist's shoe is really the beginning of the bicycle drive train, especially if the intention is to achieve high performance. A sloppy fitting shoe will be as inefficient as loose bearings.


Fork Crown Race Cutting and Facing

This article will review the use of the Crown Race Cutter to machine and face the fork race seat.


NuVinci® N360® Hub Installation and Adjustment

This article reviews the installation and adjustment of the NuVinci® N360® CVP rear hub and shifting system. The order of procedures to follow will vary depending upon whether you are installing a new system or servicing a previously install hub.


Tire and Tube Removal and Installation Video

This article will discuss the removal and installation of tires and tubes.


Road Positioning Chart

This article will describe the use of the Road Positioning Chart for competitive road bicycles. A similar article for mountain bikes is available at MTB Positioning Chart.


CBP-3 Puller Repair

This article will review the replacement of the pulling caliper finger part #1193-2 on the CBP-3. Bearings and cranks that are seized in place may exceed the strength of the caliper and this may cause the caliper to fail.


Chain Replacement: Single Speed Bikes Video

This article will discuss replacing a chain on a single speed or two-sprocket bike. Sizing, installing and correct tension will be reviewed.


SPD Pedal Overhaul Video

A comprehensive guide to overhauling and adjustment of common Shimano® SPD-type pedals.


Chain Tension for Tandem Front End

This article will discuss sizing the captain-to-stoker chain for tandems, called the "primary" chain. This is the chain that connects the front rings to the back rings. Setting chain tension will also be discussed.


Filter by Category
Topics