Repair Help

Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).

1-10 of 18 Articles Found

PRS-33 & PRS-33.2 Annual Maintenance

This article will review some typical yearly maintenance procedures for your PRS-33 or PRS-33.2. These procedures should keep your stand in optimal shape during peak season and prevent larger problems down the road.

PRS-33 & PRS-33.2 Troubleshooting

This article outlines common symptoms and fixes for the Park Tool PRS-33 & PRS-33.2 Power Lift Shop Stands.

How to Center Park Tool Wheel Truing Stands Video

This article will discuss the calibration procedures for the TS-2, TS-2.2, TS-2.2P, TS-2.3, and TS-4.2 Professional Wheel Truing Stands. The same procedures and concepts apply to all stands.

Guide to Chain Tool Pin Replacement Video

This article will outline the proper usage of our chain tools, as well as the pin replacement process. Park Tool chain tools are designed to provide years of use for the professional and home mechanic. With proper use, the chain tool pin should also last a long time - however, it can break due to fatigue or improper use. The pin is replaceable and is available from your local retailer or from

Beam-Type Torque Wrench Use and Calibration

This article will discuss the use and calibration of beam-style torque wrenches such as the TW-1.2 and TW-2.2, as well as the TW-1 and TW-2 (discontinued).

TS-RK Rebuild Kit Installation Video

This article will discuss the installation of the TS-RK rebuild kit into TS-2, TS-2.2, and TS-2.3 Truing Stands.

PFP-6 and PFP-3 Service

This article will discuss the service of the PFP-6 Home Mechanic Floor Pump and the PFP-3 Floor Pump (both discontinued).

PFP-4 and PFP-2 Service

This article will discuss the service of the PFP-4 and PFP-2 Professional Floor Pump (both discontinued).

CBP-3 Puller Repair

This article will review the replacement of the pulling caliper finger part #1193-2 on the CBP-3. Bearings and cranks that are seized in place may exceed the strength of the caliper and this may cause the caliper to fail.

1951-15 Adapter Stud Installation for PRS-15

This article demonstrates how to disassemble your PRS-15 repair stand to replace the original 100-15X clamp with the 100-25D micro-adjust clamp using the 1951-15 adapter stud.

Filter by Category