Chain
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
985-1 |
CT-6.2 Replacement Pin | The 985-1 is the replacement pin for the CT-6.2 chain tool. Packaged carded: 985-1C NOTE: The 985-1 will fit the previous generaiton of CT-6. The pin will also push out the chain rivet compl... |
 |
CB-2 |
Citrus ChainBrite | Biodegradable Citrus ChainBrite is specially formulated for use in the Cyclone Chain Scrubber. It quickly removes the toughest grease and grime buildup, yet won’t harm alloy, plastic or r... |
 |
CT-11 |
Rivet Peening Tool for Campagnolo 11-speed chain | After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deform... |
 |
CC-2 |
Chain Checker | To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of ... |
 |
CT-6.3 |
Folding Chain Tool with Peening Anvil |
 |
 |
IB-3 |
I-Beam Mini Fold-Up with Chain Tool | A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver S... |
 |
MLP-1 |
Master Link Pliers | Many derailleur chains use a “master link” that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over... |
 |
RBS-5 |
CM-5.2 and CM-5 Rebuild Kit | The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks. Packaged carded: RBS-5C |
 |
CC-3.2 |
Chain Wear Indicator | A worn chain shifts poorly and wears sprockets at an accelerated rate. The CC-3.2 is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the poin... |
 |
CT-3.2 |
Chain Tool |
|
 |
CT-4.3 |
Master Chain Tool with Peening Anvil |
|
 |
CTP-4K |
Replacement Chain Tool Pin Kit for CT-4.3, CT-4.2, CT-4, or CT-11 | The CTP-4K includes four (4) replacement chain tool pins and one 5/32" ball bearing. To replace the chain tool pin, unscrew the cap, and pull out the old pin. Use care not to lose the b... |
 |
CTP |
Replacement Tool Pin | These pins fit Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. Made from hardened alloy tool steel. Uses 7mm or 9/32" 12 pt box end/socket. Packaged carded: CT... |
 |
CL-1 |
Synthetic Blend Chain Lube with PTFE | A new chain lube from Park Tool, the leader in bicycle maintenance products. Using PTFE and a proprietary blend of oils, Park Tool Chain Lube works great in wet or dry conditions. Penetr... |
 |
CT-5 |
Mini Chain Brute Chain Tool | This small chain tool goes anywhere and actually performs like a shop quality tool. The fine thread, special “V”- shaped handle, and super strong replaceable pin make chain removal and ... |
