Wheel & Spoke
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
TS-8 |
Home Mechanic Wheel Truing Stand | Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16” to 29”, with or without the tire mounted. Innovative ... |
 |
TS-2TA |
Thru Axle Adaptors for TS-2.2 and TS-2 Truing Stands | Allows truing stand to be used with 12mm, 15mm, 20mm and 25mm thru axle hubs. Axles must be removed to use adaptors. Adaptors mount easily to TS-2.2, TS-2 or TS-8 Truing Stands. |
 |
SW-13 |
Spoke Wrench for Mavic® Wheel Systems | Comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic® fittings, including the Mavic® SSC Ksyrium and Crossmax SLR wheels. The smaller end fits six spline... |
 |
SW-16 |
3.2mm Square Socket Internal Nipple Spoke Wrench | Fits the 3.2mm square shaped internal nipples used on aero rims. The SW-16 offers an extra long reach (3.5”/ 90mm) for those deep section aero rims. Ergonomically-designed screwdriver hand... |
 |
SW-18 |
5.5mm Hex Socket Internal Nipple Spoke Wrench | The SW-18 has a 5.5mm hex socket. It uses an extra long (3.25”/85mm) spoke wrench socket to fit internal spoke nipples found on many deep section aero rims. Featuri... |
 |
SW-20 |
Master Spoke Wrench | Destined to become a classic! The Master Spoke Wrench is an investment cast workhorse poured from the best steel, precisely machined, heat treated for hardness, then polished and plate... |
 |
SW-22 |
Master Spoke Wrench | Destined to become a classic! The Master Spoke Wrench is an investment cast workhorse poured from the best steel, precisely machined, heat treated for hardness, then polished and plated.... |
 |
1554-1 |
Centering Gauge | The 1554-1 represents a dished rear wheel to assist in centering the TS-2.2 or TS-2 truing stand. |
 |
TM-1 |
Spoke Tension Meter | The TM-1 Tension Meter accurately and reliably measures the absolute tension of each of the spokes in a wheel, as well as the relative tension between all the spokes in a wheel. Easy to use and ... |
 |
TS-2EXT |
Truing Stand Upright Extension | TS-2EXT Truing Stand Upright Extensions install in seconds on any TS-2 Truing Stand, allowing the stand to be used on wheels with hubs up to 160mm wide (tandem and downhill bikes), as well as on 70... |
 |
SW-5 |
Spoke Wrench | The SW-5 is sized for DT Tricon, the Torx® style splined nipples. Professional quality, precision-sized spoke wrenches are hardened and nickel plated for long service. Park Tool Spoke Wrenches ... |
