Headset
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
767 |
Facing Pilot for OnePointFive headset standard | The #767 is used with the HTR-1 (HTR-1B) and 690XL facer for a facing only option. It is used with headtubes having an inside diameter of 49.8mm (the 1.5” standard). SHIS termino... |
 |
761s |
Reaming and Facing Cutter for Hiddenset Headsets | The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA&r... |
 |
756s |
Head Tube Cutter for IS headsets | Reaming and Facing Cutters. Reams and faces head tubes that use integrated headset systems with a 41mm bearing and 45 degree angular contact, such as Cane Creek IS and others. Includes upper and lo... |
 |
754.2 |
33.9mm reamer for HTR | The 754.2 is a reamer for the HTR. It is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1/8" standard. NOTE: For sharpening services of cutt... |
 |
751.2 |
Head Tube Reamer for 1-inch Headset Standard | The 751.2 is a reamer for the HTR. It is sized to 30.1mm. The allows a 0.1mm interference fit when pressing the 30.2mm headset of the "euro" one-inch standard. NOTE: For sharpening ... |
 |
690-XL |
Oversized Replacement Facer | The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used... |
 |
690 |
690 Replacement Facer | The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1 and BTS-1. The facer has an outside diameter of approximately 45mm. NOTE: For sharpening services of cutting tools see Park Too... |
 |
TNS-15 |
Threadless Nut Setter | The Threadless Nut Setter TNS-15 is used for the 1¼" and 1.5” threadless headset systems. Thread the nut onto the TNS-15, insert into the fork stack, and tap it in with a hammer. ... |
 |
SG-6 |
Threadless Saw Guide | The SG-6 Threadless Saw Guide ensures a straight, clean cut on 1", 1-1/8", and 1-1 4" threadless forks. Simply clamp the SG-6 onto the fork and cut, letting the SG-6 guide the hacksa... |
 |
SG-2 |
Threaded Saw Guide | Cut any 1-1/8" fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install e... |
 |
SG-1 |
Threaded Saw Guide | Cut any threaded one-inch fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset par... |
 |
HTR-1B |
Head Tube Reaming and Facing Set | Proper frame preparation is very important. The HTR-1B combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. HTR-1B comes with a reamer of 33.9mm for the... |
 |
HTR-1 |
Head Tube Reaming and Facing Set | Proper frame preparation is very important. The HTR-1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes 30.1 mm reamer (part #751.2) ... |
 |
FTS-1 |
Fork Threading Set | The FTS-1 Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest... |
 |
CRS-15 |
Crown Race Setter for 1.5 inch column | The CRS-15 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer... |
 |
TNS-1 |
Threadless Nut Setter | The Threadless Nut Setter is used to install star-fangled nuts found on threadless headset systems. Thread the nut onto the TNS, insert into the fork stack, and tap it in with a hammer. Sets the st... |
 |
RT-2 |
Head Cup Remover- Oversized | The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Design... |
 |
RT-1 |
Head Cup Remover | The RT-1 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup. Fits 1&r... |
 |
CRP-2 |
Adjustable Crown Race Puller |
 |
 |
TNS-4 |
Deluxe Threadless Nut Setter | The TNS-4 makes it quick and easy to install star-fangled nuts used with 1” and 1-1/8” threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly... |
 |
690-XXL |
Facing Cutter | The 690-XXL is a facer for the large heatubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with #750 Centering Cone Adaptor and #789 Reamer or #790 Pilot when facing head tubes... |
 |
788 |
43.95mm Reamer | Reams head tube I.D. to 43.95mm to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). Used with #690-XL Facing Cutter and #750 Centering Con... |
 |
789 |
55.95mm Reamer | Reams head tube I.D. to 55.95mm to accept “internal” headset cups with 56.00 - 56.10mm O.D. (1-1/2 ZS standard). Used with #690-XXL Facing Cutter and #750 Centering Cone Ada... |
 |
790 |
Pilot | Used with the 690-XXL Facing Cutter and #750 Centering Cone Adaptor when facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard). SIS terminology: ... |
