Item # TS-2

(discontinued) / Tools / Wheel Truing Stands

Professional Wheel Truing Stand

The TS-2 was discontinued in 2010 and replaced with the TS-2.2, which has longer uprights and larger calipers to accommodate larger wheels.

The Park Tool Professional Truing Stand is the stand to choose for heavy shop use. Accepts wheels from 16" to 28" with or without tire removed. Both axle-holding uprights move simultaneously, always centering wheel hub with calipers, regardless of hub width. Calipers and caliper arm are spring-loaded to prevent jamming with badly out-of-true wheels. Made of heavy chrome plated steel with nylon bushings at pivot points. Can be bench-mounted or vise-held. The standard of the industry. If a forward or backward tilt is desired, use with Truing Stand Tilting Base (TSB-2) shown below. For precision work, the TS-2 should be used with the WAG-4 Professional Wheel Alignment Gauge. Opens up to accept hubs 150mm wide.

View Product Details

Need service? See our Limited Warranty or get Replacement Parts in a snap.