Item # FR-6/ Tools / Cassette & Freewheel
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts.
- Removes four-notch BMX / single-speed freewheel from hubs with 1.37 x 24 TPI threads
- The FR-6 has four notches approximately 32mm across measured inside to inside and 40mm outside to outside
- Fits over axles up to 16mm thread diameter
- Always use a skewer or axle nut to hold tool firmly in place during removal
Buy FR-6 Onlineclose