Custom Laser Engraving


Now you can have your shop name or logo accompany your customers on every ride. Just order a minimum of 50 I-Beam multi-tools (any number of IB-1 and IB-2 tools may be combined to reach the 50-piece minimum) and we will custom laser engrave each tool at no charge*. If you don't have a logo, we also offer four standard fonts, samples of which can be seen below. Fill out the Laser Engraving Request form with your preferred text or artwork and a Park Tool team member will get in touch to complete the order. The process takes 2–3 weeks and all tools must be shipped to the same location.

* There is a one-time $25 USD graphics setup charge with your first order.

Standard Font Engraving:

  • Text engraved in standard fonts is limited to 24 characters max, including spaces.

Custom Logo Engraving:

  • Requires vector artwork with outlined text saved as AI, EPS, or PDF
  • Logos can be used in horizontal format only
  • Maximum logo dimensions: 2.0" x 0.168" (50.8 mm x 4.27 mm)
  • Custom logos can be formatted using our laser engraving template