SRAM® AXS® Shifter Pairing
This article reviews how to connect or "pair" SRAM® AXS® wireless shifters.
This article will review SRAM® AXS® component groups installed on a bike being paired or connected wirelessly from the shifter to the derailleur. This is only necessary for out-of-the box components, or for shifters that were replace, for example from crash damage.
Locate the AXS® button on rear derailleur. Press and hold the until the green LED blinks. Release button.
Locate the AXS® button on front derailleur. Press and hold the until the green LED blinks. Release button.
Press and hold the AXS® button on one shifter until the green LED blinks quickly, then release. Repeat on the other shifter.
Again locate AXS® button at rear derailleur. Press and release to end pairing session. Green LED lights should stop blinking. Bike is ready for gear adjustment.