Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
1-10 of 12 Articles Found
The article will discuss adjustment of rear derailleur limit screws and indexing.
This article will discuss the basic adjustment of the front derailleur. This article assumes the derailleur is compatible with the shifting system and is not extremely worn out.
In order to service and fine-tune the front derailleur, we need to understand how it works. This article helps give a basic understanding of how front derailleurs work to aid you as you work on servicing your own front derailleur.
In order to service and fine-tune the rear derailleur, we must first understand how it works. This article helps give a basic understanding of how rear derailleurs work to aid you as you work on servicing your own rear derailleur.
This article will review troubleshooting rear mechanical derailleur shifting.
This article will review the common sources of poor front derailleur performance, and how to fix them.
This article will discuss derailleur hanger alignment and use of the DAG-2.2 and DAG-2 Derailleur Alignment Gauge.
This article will discuss the cutting and sizing of derailleur cable housing.
This article will discuss the installation and adjustment of the Di2 Shimano Electronic Intelligent System®. This system is incorporated in the designs of some new bike models. This article will focus on the installation of the system as an after-market component system.
This article will discuss bar end shifters, often found on the ends of time trial or triathlon handlebars.