Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
21-30 of 142 Articles Found
This article will discuss the service and adjustment of the Avid® mechanical brake systems. For information on the disc rotor mounting and service, see Rotor Mounting and Service.
This article will discuss disc brake rotor installation and truing.
This article will assist in identifying the crank system found on your bike, and direct you to the article that outlines the full process of removal and installation.
This article will review housing and cable installation for drop bar brake levers.
The article will discuss adjustment of rear derailleur limit screws and indexing.
This article will review the removal and installation of rear cogs on derailleur type bicycles as well as single speed freewheeling BMX/Freestyle bikes.
This article will discuss removing freewheels that have no removal tool option. This will be useful if the wheel is to be reused, but it will effectively destroy the freewheel. For wheels that are damaged with these types of freewheels, it is best to simply replace both the complete wheel and freewheel.
This article will discuss the basic adjustment of the front derailleur. This article assumes the derailleur is compatible with the shifting system and is not extremely worn out.
This article will discuss derailleur hanger alignment and use of the DAG-2.2 and DAG-2 Derailleur Alignment Gauge.
This article will discuss the cutting and sizing of derailleur cable housing.