Home > Park Tool Videos
Park Tool Videos
|
FR-5G
More info: http://www.parktool.com/product/freewheel-remover-fr-5g Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings Also Fits Shimano disc brake lockrings Guide pin stabilizes tool |
|
FR-5_web
More info: http://www.parktool.com/product/cassette-lockring-tool-fr-5 Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings. The FR-5 has 12 splines that are approximately 23.4mm across Also fits Shimano disc brake lockrings. |
|
PMP-5
This video will show the features of the PMP-5 Dial Adjust Frame Pump by Park Tool |
|
CBP-3
More info: http://www.parktool.com/product/campagnolo-bearing-puller-and-installation-set-cbp-3 Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller's forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system "pulls" the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer. |
|
PB-1 Demonstration
More info: http://www.parktool.com/product/portable-workbench-PB-1 Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage. |
|
ISC-4 Demonstration
More info: http://www.parktool.com/product/internal-seat-tube-clamp-isc-4 Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage. The new ISC-4 securely holds most bikes without clamping on any frame tube. To use, simply insert the ISC-4 into the frame's seat tube, tighten the knob, and clamp into any Park Tool Repair Stand. The ISC-4's hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizes—anything with an inside diameter of 24mm to 32mm. |
|
More info: http://www.parktool.com/product/cyclone-r-chain-scrubber-CM-5 Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. |
|
BBT-9 Demonstration
More info: http://www.parktool.com/product/bottom-bracket-tool-BBT-9 The Park Tool BBT-9 Bottom Bracket Tool is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. |
|
CC-2
To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading. |
|
BBT-22
More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
BBT-19 Demonstration
The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
DT-3i
A dial indicator kit that bolts to the DT-3 rotor truing gauge, allowing for greater accuracy and a way to measure and quantify results. More info at http://www.parktool.com/product/dial-indicator-kit-DT-3i |
|
DT-3
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. More info at http://www.parktool.com/product/DT-3 |
|
BBT-10
The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10 |
|
TW-5
With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. More info at http://www.parktool.com/product/ratcheting-click-type-torque-wrenches |
|
TS-2Di
A dial indicator bracket and set that measures a wheel's lateral and radial run-out to .01mm • Mounts easily to any TS-2 or TS-2.2 Truing Stand • Enables user to set and follow tolerances for each wheel • Includes two dials, mounting brackets and specially designed tips. More info at http://www.parktool.com/product/dial-indicator-gauge-set-for-ts-2-2-and-ts-2-truing-stands-ts-2di |
|
DP-1_11-2-10
DP-1_11-2-10 |
|
Professional Micro-Adjust Repair Stand Clamps
|
|
TS-8 Demonstration
Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability. |
|
TNS-4 Demonstration
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (#822). |
|
MTB-7 Demonstration
An outstanding value, the quality MTB-7 Rescue Tool is packed with 21 useful tools for emergency repairs on the road or trail. Includes nylon carrying case with embroidered Park Tool logo. Tools included: 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 0.127", 0.130", & 0.136" spoke wrenches 8, 9, & 10mm box end wrenches Chainring nut wrench Dust cap remover Serrated knife Bottle opener |
