|
PRS-33 Assembly Instructions
Click here for instructional PDF: http://www.parktool.com/documents/37f1e892aa4be04d7470b96d8c7f6aafab4ba6b5.pdf NOTE: This video is intended as a visual aid for the written instructions and does not contain all details necessary for assembly. Please download the instructional PDF using the link above. |
|
MLP-1 Demonstration
More info: http://www.parktool.com/product/master-link-pliers-MLP-1 Many derailleur chains use a "master link" that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles. |
|
100-7X Exteme Range Clamp- Product Demonstration
http://www.parktool.com/product/extreme-range-clamp-100-7x This is a demonstration of the 100-7X Exteme Range Clamp- Product Demonstration |
|
SG-8 Saw Guide for Carbon Composite Forks: Product Demonstration
Video demonstration of the SG-8 Saw Guide. See also: http://www.parktool.com/product/threadless-saw-guide-for-carbon-composite-forks-sg-8 |
|
Product Demonstration: TS-25 Repair Stand Mounted Truing Stand
This video is a Product Demonstration of the TS-25 Repair Stand Mounted Truing Stand. The TS-25 mounts to a bicycle repair stand to allow wheel truing. See product at http://www.parktool.com/product/repair-stand-mounted-wheel-truing-stand-ts-25 |
|
Product Demonstration: CBP-5 Bearing and Crank puller adaptor set for Campagnolo(R) Power-Torque
Product highlights of the CBP-5 puller adaptor set See also http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque |
|
PFP-6 use on Presta and Schrader vales
http://www.parktool.com/product/home-mechanic-floor-pump-pfp-6 Using the PFP-6 Home Mechanic Floor Pump. |
|
PFP-4 use on Presta and Schrader vales
http://www.parktool.com/product/professional-mechanic-floor-pump-pfp-4 Using the PFP-4 Professional Mechanic Floor pump. |
|
PCS-9 Home Mechanic Repair Stand
More info: http://www.parktool.com/product/home-mechanic-repair-stand-pcs-9 The new PCS-9 offers Park Tool quality in an entry level repair stand for the home mechanic. The PCS-9 works well for many recumbents and bikes with odd shaped tubing. |
|
TW-6 Ratcheting "Click" Type Torque Wrench
More info: http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-6 With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. |
|
CCP-22 Crank Remover
More info: http://www.parktool.com/product/crank-puller-for-square-taper-cranks-ccp-22 The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles. |
|
HT-8 Hex Wrench Tool, 8mm
More info: http://www.parktool.com/product/8mm-hex-tool-ht-8 Specially designed for cranks and pedals, our new HT-8 hex tool is designed and built for speed, leverage and comfort. Perfect for changing rear sprockets or splitting cases. HT tools feature an ergonomically designed screwdriver grip, with an extra long, super strong 8mm hex on one end and a ball driver hex on the other. |
|
BBT-30.3 Bottom Bracket Tool Set
http://www.parktool.com/product/bottom-bracket-tool-set-for-bb30-bbt-30-3 The BBT-30.3 includes a bearing remover, which slides through the bottom bracket shell and into the bearing so it can be tapped out with a hammer. The set also includes two installation bushings #668 designed for the BB30 and PF30 bearings. |
|
DAG-2 Derailleur Hanger Alignment Gauge
More information: http://www.parktool.com/product/derailleur-hanger-alignment-gauge-dag-2 The Derailleur Hanger Alignment Gauge can help solve a multitude of derailleur shifting problems, most notably with index shifting systems. This tool is extremely steady in operation and is simple to use. |
|
PCS-10 Home Mechanic Repair Stand
More info: http://www.parktool.com/product/home-mechanic-repair-stand-pcs-10 The PCS-10 has all the features of our popular PCS-9 Home Mechanic Repair Stand but with special upgrades to make set up, take down, and use faster and easier. The PCS-10 works well with many recumbents and bikes with odd shaped tubing |
|
CN-10 Professional Cable and Housing Cutter
More info: http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10 The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing. |
|
PRS-21 Super Lite Team Race Stand
More info: http://www.parktool.com/product/super-lite-team-race-stand-prs-21 Same great stability, versatility and features as the PRS-20 Team Race Stand, yet weighs 35% less—only 13.5 lbs (6.2 kg). Built using a combination of steel for strength in joints and pivots, and aluminum to save weight. The PRS-21 is the perfect stand to choose when size and weight are important. Ideal for the traveling mechanic. |
|
WAG-5 Portable Dishing Tool
More info: http://www.parktool.com/product/portable-wheel-dishing-tool-wag-5 For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or, "dished". |
|
WAG-4 Wheel Alignment Gauge
More info: http://www.parktool.com/product/wheel-alignment-gauge-wag-4 For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or "dished". To check this, and to make precision adjustments, a wheel alignment gauge (also called a "dishing tool") is a must. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand. |
|
TS-2.2 Professional Wheel Truing Stand
More info: http://www.parktool.com/product/professional-wheel-truing-stand-ts-2-2 The world's most popular wheel truing stand and the standard of the bicycle industry for 35 years is now, more than ever, the stand to choose for daily shop use. The new TS-2.2 combines time-tested functions from the legendary TS-2 with new features to make it more accurate and versatile than ever. |
|
CT-11 RIvet Peening Tool for Campagnolo (R) 11-Speed Chain
More info: http://www.parktool.com/product/rivet-peening-tool-for-campagnolo-11-speed-chain-ct-11 After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. |
|
PRS-20
For more info: http://www.parktool.com/product/team-race-stand-prs-20 The new PRS-20 Team Race Stand is a compact, Euro-style work stand that securely holds the bike without clamping the frame tubes or seat post. Ideal for bikes with ultra lightweight frame tubes and seatposts, and for bikes with tight access areas that can't be clamped. |
|
PRS-25
More info: http://www.parktool.com/product/team-issue-repair-stand-prs-25 Designed from the ground up....literally...to create what we believe is the finest folding stand available. Lightweight, stable and packed with features: Quickly and easily folds to 47" Clamping height adjusts up to 60" Proprietary Hexatude hex-shaped aluminum tubing ensures low flex and no rotation Aluminum leg straps ensure all parts slide, fold and unfold together |
|
IB-3 I-Beam Mini Fold Up Hex Wrench/Screwdriver/Star Driver Set
For more info: http://www.parktool.com/product/i-beam-mini-fold-up-with-chain-tool-ib-3 A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver Straight blade screw driver Composite wrapped tire lever two spoke wrenches One size equal to SW-0, black, for 3.23mm nipples Second size equal to SW-2, red, for 3.45mm nipples 10-speed compatible chain tool Nominal dimensions: 3.5" x 1.6" x 1" (90mm x 40mm x 25mm) Weight 6 ounces (170 grams) |
|
FR-5G
More info: http://www.parktool.com/product/freewheel-remover-fr-5g Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings Also Fits Shimano disc brake lockrings Guide pin stabilizes tool |
|
FR-5_web
More info: http://www.parktool.com/product/cassette-lockring-tool-fr-5 Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings. The FR-5 has 12 splines that are approximately 23.4mm across Also fits Shimano disc brake lockrings. |
|
PMP-5
This video will show the features of the PMP-5 Dial Adjust Frame Pump by Park Tool |
|
CBP-3
More info: http://www.parktool.com/product/campagnolo-bearing-puller-and-installation-set-cbp-3 Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller's forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system "pulls" the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer. |
|
PB-1 Demonstration
More info: http://www.parktool.com/product/portable-workbench-PB-1 Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage. |
|
ISC-4 Demonstration
More info: http://www.parktool.com/product/internal-seat-tube-clamp-isc-4 Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage. The new ISC-4 securely holds most bikes without clamping on any frame tube. To use, simply insert the ISC-4 into the frame's seat tube, tighten the knob, and clamp into any Park Tool Repair Stand. The ISC-4's hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizes—anything with an inside diameter of 24mm to 32mm. |
|
More info: http://www.parktool.com/product/cyclone-r-chain-scrubber-CM-5 Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. |
|
BBT-9 Demonstration
More info: http://www.parktool.com/product/bottom-bracket-tool-BBT-9 The Park Tool BBT-9 Bottom Bracket Tool is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. |
|
CC-2
To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading. |
|
BBT-22
More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
BBT-19 Demonstration
The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
DT-3i
A dial indicator kit that bolts to the DT-3 rotor truing gauge, allowing for greater accuracy and a way to measure and quantify results. More info at http://www.parktool.com/product/dial-indicator-kit-DT-3i |
|
DT-3
Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. More info at http://www.parktool.com/product/DT-3 |
|
BBT-10
The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10 |
|
TW-5
With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. More info at http://www.parktool.com/product/ratcheting-click-type-torque-wrenches |
|
TS-2Di
A dial indicator bracket and set that measures a wheel's lateral and radial run-out to .01mm • Mounts easily to any TS-2 or TS-2.2 Truing Stand • Enables user to set and follow tolerances for each wheel • Includes two dials, mounting brackets and specially designed tips. More info at http://www.parktool.com/product/dial-indicator-gauge-set-for-ts-2-2-and-ts-2-truing-stands-ts-2di |
|
DP-1_11-2-10
DP-1_11-2-10 |
|
Professional Micro-Adjust Repair Stand Clamps
|
|
TS-8 Demonstration
Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability. |
|
TNS-4 Demonstration
The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (#822). |
|
MTB-7 Demonstration
An outstanding value, the quality MTB-7 Rescue Tool is packed with 21 useful tools for emergency repairs on the road or trail. Includes nylon carrying case with embroidered Park Tool logo. Tools included: 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 0.127", 0.130", & 0.136" spoke wrenches 8, 9, & 10mm box end wrenches Chainring nut wrench Dust cap remover Serrated knife Bottle opener |
© 2013, Park Tool Co. - ® PARK TOOL and the color BLUE are registered trademarks of Park Tool Co.
All other referenced trademarks and trademark registrations are the property of their respective owners.