Home > Park Tool Videos

Park Tool Videos

VdoOlBR2lJY_0_195x145 Video demonstration for: I-Beam Mini Fold-Up with Chain Tool

IB-3 I-Beam Mini Fold Up Hex Wrench/Screwdriver/Star Driver Set

 

For more info: http://www.parktool.com/product/i-beam-mini-fold-up-with-chain-tool-ib-3 A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver Straight blade screw driver Composite wrapped tire lever two spoke wrenches One size equal to SW-0, black, for 3.23mm nipples Second size equal to SW-2, red, for 3.45mm nipples 10-speed compatible chain tool Nominal dimensions: 3.5" x 1.6" x 1" (90mm x 40mm x 25mm) Weight 6 ounces (170 grams)

Tagged:

O44Vk9P1HV4_0_195x145 Video demonstration for: Cassette Lockring Tool

FR-5G

 

More info: http://www.parktool.com/product/freewheel-remover-fr-5g Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings Also Fits Shimano disc brake lockrings Guide pin stabilizes tool

Tagged:

NHkXh8UQaz0_0_195x145 Video demonstration for: Cassette Lockring Tool

FR-5_web

 

More info: http://www.parktool.com/product/cassette-lockring-tool-fr-5 Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings. The FR-5 has 12 splines that are approximately 23.4mm across Also fits Shimano disc brake lockrings.

Tagged:

Kxqu6Tcsb_g_0_195x145 Video demonstration for: Dial Adjust Frame Pump

PMP-5

 

This video will show the features of the PMP-5 Dial Adjust Frame Pump by Park Tool

Tagged:

CBP-3

 

More info: http://www.parktool.com/product/campagnolo-bearing-puller-and-installation-set-cbp-3 Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller's forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system "pulls" the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.

Tagged:

DG-BlpWOB3Y_0_195x145 Video demonstration for: Portable Workbench

PB-1 Demonstration

 

More info: http://www.parktool.com/product/portable-workbench-PB-1 Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage.

Tagged:

Jko42C3TBus_0_195x145 Video demonstration for: Internal Seat Tube Clamp

ISC-4 Demonstration

 

More info: http://www.parktool.com/product/internal-seat-tube-clamp-isc-4 Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage. The new ISC-4 securely holds most bikes without clamping on any frame tube. To use, simply insert the ISC-4 into the frame's seat tube, tighten the knob, and clamp into any Park Tool Repair Stand. The ISC-4's hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizes—anything with an inside diameter of 24mm to 32mm.

Tagged:

 

More info: http://www.parktool.com/product/cyclone-r-chain-scrubber-CM-5 Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean.

Tagged: Chain Cleaning Repair

FBO6OwQAwXg_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-9 Demonstration

 

More info: http://www.parktool.com/product/bottom-bracket-tool-BBT-9 The Park Tool BBT-9 Bottom Bracket Tool is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap.

Tagged:

JKMotH68F-w_0_195x145 Video demonstration for: Chain Checker

CC-2

 

To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading.

Tagged:

YS69VTz6Px4_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-22

 

More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

CIkT48qt_UA_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-19 Demonstration

 

The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

Ddw8AnCbm_c_0_195x145 Video demonstration for: Dial Indicator Kit

DT-3i

 

A dial indicator kit that bolts to the DT-3 rotor truing gauge, allowing for greater accuracy and a way to measure and quantify results. More info at http://www.parktool.com/product/dial-indicator-kit-DT-3i

Tagged:

AW-5FntSFms_0_195x145 Video demonstration for: Rotor Truing Gauge

DT-3

 

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. More info at http://www.parktool.com/product/DT-3

Tagged:

KnmUscLHv3E_0_195x145 Video demonstration for: Adjusting Cap Tool

BBT-10

 

The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10

Tagged:

TW-5

 

With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. More info at http://www.parktool.com/product/ratcheting-click-type-torque-wrenches

Tagged:

TS-2Di

 

A dial indicator bracket and set that measures a wheel's lateral and radial run-out to .01mm • Mounts easily to any TS-2 or TS-2.2 Truing Stand • Enables user to set and follow tolerances for each wheel • Includes two dials, mounting brackets and specially designed tips. More info at http://www.parktool.com/product/dial-indicator-gauge-set-for-ts-2-2-and-ts-2-truing-stands-ts-2di

Tagged:

O64GFXBZtDA_0_195x145 Video demonstration for: Friction Fit Dummy Pedal

DP-1_11-2-10

 

DP-1_11-2-10

Tagged:

Professional Micro-Adjust Repair Stand Clamps

 

Tagged:

H6iNp2a8JkQ_0_195x145 Video demonstration for: Home Mechanic Wheel Truing Stand

TS-8 Demonstration

 

Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability.

Tagged:

497ULB88hEw_0_195x145 Video demonstration for: Deluxe Threadless Nut Setter

TNS-4 Demonstration

 

The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (#822).

Tagged:

AY13eJGlL9U_0_195x145 Video demonstration for: Rescue Tool

MTB-7 Demonstration

 

An outstanding value, the quality MTB-7 Rescue Tool is packed with 21 useful tools for emergency repairs on the road or trail. Includes nylon carrying case with embroidered Park Tool logo. Tools included: 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 0.127", 0.130", & 0.136" spoke wrenches 8, 9, & 10mm box end wrenches Chainring nut wrench Dust cap remover Serrated knife Bottle opener

Tagged: