Home > Park Tool Videos

Park Tool Videos

GvMep9y7d7c_0_195x145 This video is used in the following articles:

 

See full article at: http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review how to re-bend a chainring in a trailside repair procedure.

Tagged:

SWWjaslstOE_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trailside repair of a flat tire and patching with the GP-2 Super Patch Kit

Tagged:

AU6JDcNqJDs_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews an on-the-ride repair of a bent derailleur hanger.

Tagged:

JavQgMQukxQ_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review the trailside conversion of a derailleur bike to a 1-speed.

Tagged:

JBboW5Ewxdw_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a pre-ride inspection of the bicycle.

Tagged:

7ltfJeYSDIs_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews the on-the-ride procedure for booting a ripped tire and patching an inner tube with the VP-1 Vulcanizing Patch Kit

Tagged:

SWEbq5Ry63Q_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trail side repair of a broken spoke

Tagged:

 

Video demonstration of the SG-8 Saw Guide. See also: http://www.parktool.com/product/threadless-saw-guide-for-carbon-composite-forks-sg-8

Tagged:

UO0YQ_kd-O0_0_195x145 This video is used in the following articles:

 

This video will review the use of the CM-5.2 Cyclone Chain Scrubber. See the full article on Springtime maintenance at: http://www.parktool.com/blog/calvins-corner/springtime-attention-brings-problem-prevention

Tagged:

 

This video is a Product Demonstration of the TS-25 Repair Stand Mounted Truing Stand. The TS-25 mounts to a bicycle repair stand to allow wheel truing. See product at http://www.parktool.com/product/repair-stand-mounted-wheel-truing-stand-ts-25

Tagged:

0tt0BeZK4E0_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the adjustments to the hydraulic brakes. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

SZOJZA9ybag_0_195x145 This video is used in the following articles:

 

This is the final video of the process of how to build a bike from frame and component parts to the complete machine. This video reviews a few final considerations and details before sending the newly assembled bike on the first test ride. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

P2BKIetBU9o_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the front derailleur adjustments. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

D8nk50i8J6k_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the sizing, cutting and installation of the chain. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

NjBNTGocP38_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur adjustments to limit screws and index settings. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

TPhsSTR5ybw_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the installation of front and rear derailleur, and the routing of the cable housing. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

ZjcmnV1MVxk_0_195x145 This video is used in the following articles:

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur hanger alignment. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

Q9W1CJN-WRY_0_195x145 This video is used in the following articles:

 

This is a series of videos that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of cassette installation and converting a rim to a tubeless tire system. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment 7. Derailleur installation and cable housing routing 8. Chain length sizing and installation 9. Installation of front and rear derailleurs 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

Xc6ZR55Hojw_0_195x145 This video is used in the following articles:

 

This video is part of a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bar, stem, brake lever, shift lever assembly and the installation of the fork into the frame. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

LRL0WsGDMhc_0_195x145 This video is used in the following articles:

 

This video is the third in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of headset installation, fork length sizing and fork column cutting. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

7OWmC8NYXI4_0_195x145 This video is used in the following articles:

 

This video is the second in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bottom bracket installation, crankset installation, and pedal installation. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

K2QvjC6k17A_0_195x145 This video is used in the following articles:

 

This video is the first in a series that will review the process of how to build a bike from frame and component parts to the complete machine. The sample equipment may or may not be applicable to your particular situation and your particular bike. Part 1 gives an introduction to the process and will review frame and fork machining. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

EoMJlbIZODw_0_195x145 This video is used in the following articles:

 

See the full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system A close up look of the Tokheim Shifting System as it runs through the gears, all five of them.

Tagged:

Gx7mqDWmNss_0_195x145 This video is used in the following articles:

 

See full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system This video is a review of the shifting system from the Tokheim Corporation.

Tagged: