Home > Park Tool Videos

Park Tool Videos

Chain Tension with the SRAM Torpedo Fixe-Freewheel Hub- part 1

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

SRAM Torpedo Hub Service- part 4

 

This is a video of the service of the SRAM Torpedo Hub.

Tagged:

SRAM Torpedo Hub Service- part 2

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

SRAM Torpedo Fixie-Freewheel Hub Service-part 1

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

JKMotH68F-w_0_195x145 Video demonstration for: Chain Checker

CC-2

 

To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading.

Tagged:

YS69VTz6Px4_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-22

 

More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

CIkT48qt_UA_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-19 Demonstration

 

The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

Ddw8AnCbm_c_0_195x145 Video demonstration for: Dial Indicator Kit

DT-3i

 

A dial indicator kit that bolts to the DT-3 rotor truing gauge, allowing for greater accuracy and a way to measure and quantify results. More info at http://www.parktool.com/product/dial-indicator-kit-DT-3i

Tagged:

AW-5FntSFms_0_195x145 Video demonstration for: Rotor Truing Gauge

DT-3

 

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. More info at http://www.parktool.com/product/DT-3

Tagged:

KnmUscLHv3E_0_195x145 Video demonstration for: Adjusting Cap Tool

BBT-10

 

The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10

Tagged:

TW-5

 

With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. More info at http://www.parktool.com/product/ratcheting-click-type-torque-wrenches

Tagged:

TS-2Di

 

A dial indicator bracket and set that measures a wheel's lateral and radial run-out to .01mm • Mounts easily to any TS-2 or TS-2.2 Truing Stand • Enables user to set and follow tolerances for each wheel • Includes two dials, mounting brackets and specially designed tips. More info at http://www.parktool.com/product/dial-indicator-gauge-set-for-ts-2-2-and-ts-2-truing-stands-ts-2di

Tagged:

GMuOIaVonrI_0_195x145 This video is used in the following articles:

Crank Removal Square Spindle Type

 

This video provides a simple overview of square spindle type cranks.

Tagged:

W-mutvqhZZ4_0_195x145 This video is used in the following articles:

Installation of Square Type Cranks.mov

 

Tagged:

CJCKm6DG-NQ_0_195x145 This video is used in the following articles:

FR 5 use

 

Use of the FR-5 cassette lockring removal and installation

Tagged:

O64GFXBZtDA_0_195x145 Video demonstration for: Friction Fit Dummy Pedal

DP-1_11-2-10

 

DP-1_11-2-10

Tagged:

ENWY0ETLx7g_0_195x145 This video is used in the following articles:

CX GreenAcres Creaking

 

Tagged:

6rt6SqoPaBs_0_195x145 This video is used in the following articles:

CX corn field repair

 

Tagged:

XfGSCfrs-mU_0_195x145 This video is used in the following articles:

CX_GreenAcres_Cash_Hill.m4v

 

Tagged:

Professional Micro-Adjust Repair Stand Clamps

 

Tagged:

0S2rY9z31TA_0_195x145 This video is used in the following articles:

JR Ranch Cyclo-cross Cat 4's at barriers

 

Tagged:

_x6SAQzBDi4_0_195x145 This video is used in the following articles:

JR Ranch kids race

 

Tagged:

BNg_7-AhuJs_0_195x145 This video is used in the following articles:

JR_Ranch_Cyclo_Cross_cowbells

 

Top of climb at JR Ranch Cyclo-Cross with cowbells

Tagged:

H6iNp2a8JkQ_0_195x145 Video demonstration for: Home Mechanic Wheel Truing Stand

TS-8 Demonstration

 

Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability.

Tagged: