Home > Park Tool Videos

Park Tool Videos

F7GZx8q5WDs_0_195x145 This video is used in the following articles:

Team 3M Work Site tour at the North Star Gran Prix

 

A tour of the work for the 2014 North Star Gran Prix, a road race in Minnesota. This is the work area for Team 3M.

Tagged:

BpfFKB-C6aQ_0_195x145 This video is used in the following articles:

Park Tool Factory Tour

 

Get a behind the scenes tour of our factory in St. Paul, Minnesota.

Tagged:

FKj8dTQ4E3s_0_195x145 This video is used in the following articles:

New Park Tool Products at Interbike 2013

 

Max Wunderlich highlights several of our new products shown at Interbike 2013 trade show.

Tagged:

RcWTPjtLVdc_0_195x145 This video is used in the following articles:

Good Morning Interbike with Eric Hawkins of ParkTool

 

Good Morning interbike sits down with Eric Hawkins of ParkTool at the 2013 interbike.

Tagged:

IadDZxhUURo_0_195x145 Video demonstration for: Power Lift Shop Stand

PRS-33 Assembly Instructions

 

Click here for instructional PDF: http://www.parktool.com/documents/584eb097e9719c2d13d0b5c516bd89606177e953.pdf NOTE: This video is intended as a visual aid for the written instructions and does not contain all details necessary for assembly. Please download the instructional PDF using the link above.

Tagged:

KLjuv6i3EhI_0_195x145 This video is used in the following articles:

The Work Horses of Park Tool

 

This video looks at just a few of the factory floor bikes we use at the Park Tool Headquarters in Minnesota.

Tagged:

KuEPiIVV-jY_0_195x145 This video is used in the following articles:

Park Tool — A Lasting Legacy

 

Park Tool commemorates its 50th Anniversary with a short video detailing our company history.

Tagged:

KKZWUPsdZL8_0_195x145 This video is used in the following articles:

2013 USA Cycling Cyclo-cross National Championships Live Webcast

 

2013 USA Cycling Cyclo-cross National Championships Live webcast of the Elite races - Sunday, January 13 Badger Prairie Park, Verona, WI Live stream schedule CST time zone 1:00 p.m. CST -- Women's Elite/U23 -- 40 minutes 2:15 p.m. CST -- Men's Elite -- 60 minutes

Tagged:

Qp0yLb3umRU_0_195x145 Video demonstration for: Master Link Pliers

MLP-1 Demonstration

 

More info: http://www.parktool.com/product/master-link-pliers-MLP-1 Many derailleur chains use a "master link" that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles.

Tagged:

ZQ0u0hlJuhs_0_195x145 This video is used in the following articles:

Free Bikes For Kids-Two interesting bikes

 

A folding Fuji that is not appropriate for the Free Bikes For Kids, and a MTB with a broken spindle

Tagged:

1KMQE8AayfE_0_195x145 This video is used in the following articles:

Free Bikes For Kids: A tour by the sIte mangaer

 

Free Bikes For Kids program and a tour by SIte Mangaer Mark Eumurian

Tagged:

LKaPg-7Yz-Q_0_195x145 This video is used in the following articles:

Free Bikes For Kids- tour of facility

 

Free Bikes For Kids- tour of facility

Tagged:

-dR269cijDk_0_195x145 This video is used in the following articles:

Free Bike For Kids- A Sample Repair

 

This video shows a sample bike repair for the "Free Bikes For Kids" program

Tagged:

JZ8JHvxgNcY_0_195x145 Video demonstration for: Power Lift Shop Stand

PRS-33 Power Lift Shop Stand

 

Introducing Park Tool's new Power Lift Shop Stand, the PRS-33. For full details, visit: http://www.parktool.com/product/power-lift-shop-stand-PRS-33

Tagged:

Pzt0_grmj80_0_195x145 This video is used in the following articles:

2012 MTB Downhill World Championships-finals day

 

This video gives a view of what mechanics do at the top of a MTB downhill race, shot at the 2012 MTB World Championships in Leogang, Austria. See the related article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

Hg1i7TGt5N4_0_195x145 This video is used in the following articles:

2012 MTB Worlds-after the DH racing

 

This video shows that it like after the racing is done at a World Championships. Bikes are cleaned, riders are packing up, and general chaos rules the afternoon. See the related article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

1AFwpO9EClw_0_195x145 This video is used in the following articles:

2012 MTB Worlds- USA TEAM SHOP TOUR

 

This is a video tour of our basement workshop at the 2012 MTB World Championships. This is the location for the USA TEAM SHOP.

Tagged:

MMHGB0fmV5g_0_195x145 This video is used in the following articles:

2012 MTB Worlds Power Washing

 

A short video example of ppwer wash of downhill racing bikes at the 2012 MTB World Championships in Leogang, Austria. See the related blog article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

6nkBd06whu8_0_195x145 This video is used in the following articles:

2012 MTB Worlds Washing-a gentle wash

 

A short video example of gentle wash of downhill racing bikes at the 2012 MTB World Championships in Leogang, Austria. See the related blog article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

CnIwmNbYkXQ_0_195x145 This video is used in the following articles:

XC bike prep 2010 mov

 

This video is an overview of pre-race preparation of XC race bikes. This video was created for use by the USA Cycling Team.

Tagged:

GUpRAF6vuAk_0_195x145 This video is used in the following articles:

Downhill Bike Pre-Race Preperation

 

This video is an overview of pre-race preparation of DH race bikes. This video was created for use by the USA Cycling Team.

Tagged:

6qO8NnynMUk_0_195x145 This video is used in the following articles:

Basic Tool Use-Hacksaw

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

_QYF9bk22tU_0_195x145 This video is used in the following articles:

Basic Tool Use-Screwdrivers, Knife

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

1Ca9SDR3CTw_0_195x145 This video is used in the following articles:

Basic Tool Use- Pliers, Adjustable Wrenches

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

HmqGow3mFJM_0_195x145 This video is used in the following articles:

Basic Tool Use-Files, Hands

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

44_cLGqt5oE_0_195x145 This video is used in the following articles:

Basic Tool Use-Hammer

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

Bc8bIiPRjSg_0_195x145 Video demonstration for: Extreme Range Clamp

100-7X Exteme Range Clamp- Product Demonstration

 

http://www.parktool.com/product/extreme-range-clamp-100-7x This is a demonstration of the 100-7X Exteme Range Clamp- Product Demonstration

Tagged:

TsLsh2gCSlU_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Bending Wheels

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a trail side repair of a bent wheel.

Tagged:

5dkTGTqUUWc_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Crank and Pedal

 

This video reviews repairs made while on-the-ride to a loose crank and loose pedal.

Tagged:

GvMep9y7d7c_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-RideRepair, Bent Chainrings

 

See full article at: http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review how to re-bend a chainring in a trailside repair procedure.

Tagged:

SWWjaslstOE_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Trialside Flats

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trailside repair of a flat tire and patching with the GP-2 Super Patch Kit

Tagged:

AU6JDcNqJDs_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, Bent Derailleuer Hanger

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews an on-the-ride repair of a bent derailleur hanger.

Tagged:

JavQgMQukxQ_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, One Speed Conversion

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review the trailside conversion of a derailleur bike to a 1-speed.

Tagged:

JBboW5Ewxdw_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Pre-Ride Inspection

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a pre-ride inspection of the bicycle.

Tagged:

7ltfJeYSDIs_0_195x145 This video is used in the following articles:

On The Ride Repairs- cut tires and patching with the VP-1

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews the on-the-ride procedure for booting a ripped tire and patching an inner tube with the VP-1 Vulcanizing Patch Kit

Tagged:

SWEbq5Ry63Q_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, trail side wheel truing from a broken spoke

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trail side repair of a broken spoke

Tagged:

SG-8 Saw Guide for Carbon Composite Forks: Product Demonstration

 

Video demonstration of the SG-8 Saw Guide. See also: http://www.parktool.com/product/threadless-saw-guide-for-carbon-composite-forks-sg-8

Tagged:

UO0YQ_kd-O0_0_195x145 This video is used in the following articles:

Calvin's Corner: Springtime Chain Cleaning with the CM-5.2

 

This video will review the use of the CM-5.2 Cyclone Chain Scrubber. See the full article on Springtime maintenance at: http://www.parktool.com/blog/calvins-corner/springtime-attention-brings-problem-prevention

Tagged:

Product Demonstration: TS-25 Repair Stand Mounted Truing Stand

 

This video is a Product Demonstration of the TS-25 Repair Stand Mounted Truing Stand. The TS-25 mounts to a bicycle repair stand to allow wheel truing. See product at http://www.parktool.com/product/repair-stand-mounted-wheel-truing-stand-ts-25

Tagged:

0tt0BeZK4E0_0_195x145 This video is used in the following articles:

How to Build a Bike-part 11 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the adjustments to the hydraulic brakes. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

SZOJZA9ybag_0_195x145 This video is used in the following articles:

How to build a bike - part 12 of 12

 

This is the final video of the process of how to build a bike from frame and component parts to the complete machine. This video reviews a few final considerations and details before sending the newly assembled bike on the first test ride. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

P2BKIetBU9o_0_195x145 This video is used in the following articles:

How to Build a Bike-part 10 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the front derailleur adjustments. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

D8nk50i8J6k_0_195x145 This video is used in the following articles:

How to Build a Bike-part 8 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the sizing, cutting and installation of the chain. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

NjBNTGocP38_0_195x145 This video is used in the following articles:

How to Build a Bike-part 9 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur adjustments to limit screws and index settings. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

TPhsSTR5ybw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 7 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the installation of front and rear derailleur, and the routing of the cable housing. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

ZjcmnV1MVxk_0_195x145 This video is used in the following articles:

How to Build a Bike-part 6 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur hanger alignment. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

Q9W1CJN-WRY_0_195x145 This video is used in the following articles:

How to Build a Bike-part 5 of 12

 

This is a series of videos that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of cassette installation and converting a rim to a tubeless tire system. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment 7. Derailleur installation and cable housing routing 8. Chain length sizing and installation 9. Installation of front and rear derailleurs 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

Xc6ZR55Hojw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 4 of 12

 

This video is part of a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bar, stem, brake lever, shift lever assembly and the installation of the fork into the frame. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

LRL0WsGDMhc_0_195x145 This video is used in the following articles:

How to Build a Bike-part 3 of 12

 

This video is the third in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of headset installation, fork length sizing and fork column cutting. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

7OWmC8NYXI4_0_195x145 This video is used in the following articles:

How to Build a Bike-part 2 of 12

 

This video is the second in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bottom bracket installation, crankset installation, and pedal installation. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

K2QvjC6k17A_0_195x145 This video is used in the following articles:

How to build a bike-part 1 of 12

 

This video is the first in a series that will review the process of how to build a bike from frame and component parts to the complete machine. The sample equipment may or may not be applicable to your particular situation and your particular bike. Part 1 gives an introduction to the process and will review frame and fork machining. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

EoMJlbIZODw_0_195x145 This video is used in the following articles:

Calvin's Corner: Tokheim Shifting System- part 1

 

See the full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system A close up look of the Tokheim Shifting System as it runs through the gears, all five of them.

Tagged:

Gx7mqDWmNss_0_195x145 This video is used in the following articles:

Tokheim Gear Shifting System-Calvin's Corner Article

 

See full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system This video is a review of the shifting system from the Tokheim Corporation.

Tagged:

Product Demonstration: CBP-5 Bearing and Crank puller adaptor set for Campagnolo(R) Power-Torque

 

Product highlights of the CBP-5 puller adaptor set See also http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque

Tagged:

-jDgFvThIbI_0_195x145 This video is used in the following articles:

The Pits

 

Video working the Pits at the at the 2012 US Cyclocross Nationals in Madison "Verona" WI. This was shot working "The Pits" for the Mens 35-39 race.

Tagged:

OmbfDqIig8Q_0_195x145 This video is used in the following articles:

CX Madison 2012 Power Washing in the Pits

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 A close up view of the mud removal during the 2012 Cyclo-cross Championships in Madison, Wisconsin.

Tagged:

RHtrMev1ubA_0_195x145 This video is used in the following articles:

2012 Cyclo-Cross Championship- bike swap

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 View from the pits at the USA 2012 Cyclo-Cross Championship in Madison Wisconsin. First is the lead off lap of the Elite Men. The second part are some bike swaps during the Collegiate division.

Tagged:

CBP-5 Service of Campagnolo Power Torque cranks

 

http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque This video reviews the removal of the Campagnolo Power Torque cranks

Tagged:

CBP-5 Bearing and Puller Adaptor Set for Power Torque cranks

 

http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque This video reviews the service of the drive side bearing on the Power Torque cranks

Tagged:

KSIDsXVP4bI_0_195x145 This video is used in the following articles:

USAC Race Mechanic Clinic-2011-Wheel change session

 

USA Cycling hosts the Bill Woodul Race Mechanic Clinic. Mechanics attend 4 days of class on being a race mechanic. This are some out takes from the wheel change session.

Tagged:

RcAK0kTJS-M_0_195x145 This video is used in the following articles:

Soutěž mechaniků Bike Brno 2011 - FASTEST TOOL CONTEST

 

Mezinárodní soutěž cyklomechaniků na veletrhu Bike Brno 2011 - sobotní finále - výměna přední duše poslepu Bike Mechanics International Contest at Bike Brno 2011 - Saturday´s finale - they had to change the front tube "blindfolded"

Tagged:

Sf8l8945Sg4_0_195x145 Video demonstration for: Home Mechanic Floor Pump

PFP-6 use on Presta and Schrader vales

 

http://www.parktool.com/product/home-mechanic-floor-pump-pfp-6 Using the PFP-6 Home Mechanic Floor Pump.

Tagged:

FuE94frfQYg_0_195x145 Video demonstration for: Professional Mechanic Floor Pump

PFP-4 use on Presta and Schrader vales

 

http://www.parktool.com/product/professional-mechanic-floor-pump-pfp-4 Using the PFP-4 Professional Mechanic Floor pump.

Tagged:

Za_SgFq6vDM_0_195x145 This video is used in the following articles:

Mont-Cenis - Last Ride & Conclusion

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The final test ride for the Mont-Cenis.

Tagged:

VyvAJEdV6MI_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issue

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Compatibility issues with the chain and rear cogs of the Maillard hub

Tagged:

LnPelyB376I_0_195x145 This video is used in the following articles:

Mont- Cenis Brake Squeal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Mont-Cenis test ride reveals brake squeal and shifting problems

Tagged:

QYWgXumw8ew_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issues

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Chain concerns on the Mont-Cenis

Tagged:

VZRmncs4eho_0_195x145 This video is used in the following articles:

Mont-Cenis Handlebar Wrap

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Handlebar wrap on the Mont-Cenis

Tagged:

Zt-jT7cKpUw_0_195x145 This video is used in the following articles:

Mont Cenis-Rear Derailleur

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The rear derailleur cage is badly bent and must be straightened.

Tagged:

NFNabpfDENo_0_195x145 This video is used in the following articles:

Mont-Cenis- Review of Progress

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A review of how things look on the reconditioning of the Peugeot Mont-Cenis

Tagged:

7aAaVOH7DNI_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Seat Post Removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult removal of the seat post assembly on the Mont-Cenis

Tagged:

Mni9UKWvdx4_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Rear Wheel

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Rear wheel issues and problem on the 1986 Peugeot Mont-Cenis

Tagged:

F-11cuGN83o_0_195x145 This video is used in the following articles:

Mont-Cenis Modolo Brakes

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Rebuilding the Modolo Speedy brakes on the 1086 Peugeot Mont-Cenis

Tagged:

FBI3dlWhXV4_0_195x145 This video is used in the following articles:

Mont-Cenis Bottom Bracket Removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult removal of the Campagnolo bottom bracket from the Mont-Cenis

Tagged:

DW2WmcvfWwE_0_195x145 This video is used in the following articles:

Mont-Cenis-crank removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult crank removal on the Peugeot Mont-Cenis

Tagged:

J7FvuUj-g0A_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Reconditioning-Front Hub

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Front hub issues on the 1986 Mont-Cenis

Tagged:

7jgofUIqYto_0_195x145 This video is used in the following articles:

Reconditioning an old Mont-Cenis 12-speed

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes An overview before the reconditioning work on a Peugeot Mont-Cenis

Tagged:

4jIRGwuSf7U_0_195x145 This video is used in the following articles:

Cross Vegas 2011-bike change and service

 

Cross Vegas 2011 action from the tech pits

Tagged:

Jx4c7MxnN-A_0_195x145 This video is used in the following articles:

Cross Vegas 2011 Racing Action

 

Some racing action from the 2011 Interbike show cycle cross raced called CROSS VEGAS.

Tagged:

SDhAyuLStwo_0_195x145 This video is used in the following articles:

2011 MTB 4X- front flat

 

A rider has a front flat after his heat of the 4X and the repair must be made quickly

Tagged:

F15MoVO7ly4_0_195x145 This video is used in the following articles:

Some machining at the 2011 MTB World Championships

 

A drill and file work to reduce the rotor side end up to accept the Shimano spider-type rotors.

Tagged:

2bzWgla3X6o_0_195x145 This video is used in the following articles:

2011 MTB World Championships U23 first lap

 

Tagged:

QMu4R5OpFYE_0_195x145 This video is used in the following articles:

De-mudding a DH bike at the 2011 MTB World Championships

 

de-mudding a DH bike

Tagged:

DOzQMg1emFY_0_195x145 This video is used in the following articles:

MTB Worls 2011 Elite Men start

 

MTB Worls 2011 Elite Men start

Tagged:

Mss7QRoATEU_0_195x145 This video is used in the following articles:

2011 MTB World Championships DH Walk

 

This is a video of the 2011 MTB World Championship DH walking inspection by the US Junior Team.

Tagged:

-pC8r1hQ2mY_0_195x145 This video is used in the following articles:

Ride 2 Recovery — Great Lakes Challenge 2011

 

This is a video of the 2011 Ride 2 Recovery Great Lakes Challenge, first day.

Tagged:

I8xBS3sZid0_0_195x145 This video is used in the following articles:

Nuvinci 360 Hub-shifting function and operation

 

This video will review the shifting operation of the Nuvinci 360 hub.

Tagged:

QMXu2eLxHpU_0_195x145 This video is used in the following articles:

Nuvinci 360 Gear Ratio

 

This video reviews the shifting of the Nuvinci 360 CVP hub.

Tagged:

ZdvqXuiRCXw_0_195x145 This video is used in the following articles:

Nuvinci 360- shift lever cable removal and installation

 

This video reviews the removal and installation of new cable in the Nuvinci N360 shift lever.

Tagged:

HayqOg7AV4U_0_195x145 This video is used in the following articles:

Nuvinci N360: Installing Hub-Interface

 

This video will review the installation of the hub-interface on the Nuvinci N360 hub.

Tagged:

8xZAtfAGSQs_0_195x145 Video demonstration for: Home Mechanic Repair Stand

PCS-9 Home Mechanic Repair Stand

 

More info: http://www.parktool.com/product/home-mechanic-repair-stand-pcs-9 The new PCS-9 offers Park Tool quality in an entry level repair stand for the home mechanic. The PCS-9 works well for many recumbents and bikes with odd shaped tubing.

Tagged:

TW-6 Ratcheting "Click" Type Torque Wrench

 

More info: http://www.parktool.com/product/ratcheting-click-type-torque-wrench-tw-6 With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-6 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case.

Tagged:

2-7jVpJikRQ_0_195x145 This video is used in the following articles:

Disc Brake Noise

 

This issue of Calvin's Corner will review a squealing brake.

Tagged:

E6ZcqNOcgm0_0_195x145 Video demonstration for: Crank Puller for Square Taper Cranks

CCP-22 Crank Remover

 

More info: http://www.parktool.com/product/crank-puller-for-square-taper-cranks-ccp-22 The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, tapered bottom bracket spindles.

Tagged:

N1iR1oVX2F8_0_195x145 Video demonstration for: 8mm Hex Tool

HT-8 Hex Wrench Tool, 8mm

 

More info: http://www.parktool.com/product/8mm-hex-tool-ht-8 Specially designed for cranks and pedals, our new HT-8 hex tool is designed and built for speed, leverage and comfort. Perfect for changing rear sprockets or splitting cases. HT tools feature an ergonomically designed screwdriver grip, with an extra long, super strong 8mm hex on one end and a ball driver hex on the other.

Tagged:

BBT-30.3 Bottom Bracket Tool Set

 

http://www.parktool.com/product/bottom-bracket-tool-set-for-bb30-bbt-30-3 The BBT-30.3 includes a bearing remover, which slides through the bottom bracket shell and into the bearing so it can be tapped out with a hammer. The set also includes two installation bushings #668 designed for the BB30 and PF30 bearings.

Tagged:

UmUrUwUsWTQ_0_195x145 Video demonstration for: Derailleur Hanger Alignment Gauge

DAG-2 Derailleur Hanger Alignment Gauge

 

More information: http://www.parktool.com/product/derailleur-hanger-alignment-gauge-dag-2 The Derailleur Hanger Alignment Gauge can help solve a multitude of derailleur shifting problems, most notably with index shifting systems. This tool is extremely steady in operation and is simple to use.

Tagged:

Cg6e21cSm_A_0_195x145 Video demonstration for: Home Mechanic Repair Stand

PCS-10 Home Mechanic Repair Stand

 

More info: http://www.parktool.com/product/home-mechanic-repair-stand-pcs-10 The PCS-10 has all the features of our popular PCS-9 Home Mechanic Repair Stand but with special upgrades to make set up, take down, and use faster and easier. The PCS-10 works well with many recumbents and bikes with odd shaped tubing

Tagged:

WOGEEVcKMAc_0_195x145 Video demonstration for: Professional Cable and Housing Cutter

CN-10 Professional Cable and Housing Cutter

 

More info: http://www.parktool.com/product/professional-cable-and-housing-cutter-cn-10 The CN-10 Cable and Housing Cutter is a shop quality cutter designed specifically for use on all bicycle cables and housing, including hard-to-cut index housing.

Tagged:

2xZI3AGhJNE_0_195x145 This video is used in the following articles:

Tour of Cali

 

highlights

Tagged:

OeLgtq6RuD0_0_195x145 Video demonstration for: Super Lite Team Race Stand

PRS-21 Super Lite Team Race Stand

 

More info: http://www.parktool.com/product/super-lite-team-race-stand-prs-21 Same great stability, versatility and features as the PRS-20 Team Race Stand, yet weighs 35% less—only 13.5 lbs (6.2 kg). Built using a combination of steel for strength in joints and pivots, and aluminum to save weight. The PRS-21 is the perfect stand to choose when size and weight are important. Ideal for the traveling mechanic.

Tagged:

ZtJA89yqnjs_0_195x145 Video demonstration for: Portable Wheel Dishing Tool

WAG-5 Portable Dishing Tool

 

More info: http://www.parktool.com/product/portable-wheel-dishing-tool-wag-5 For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or, "dished".

Tagged:

5qKv1VYofOE_0_195x145 Video demonstration for: Wheel Alignment Gauge

WAG-4 Wheel Alignment Gauge

 

More info: http://www.parktool.com/product/wheel-alignment-gauge-wag-4 For a wheel to perform properly, it is important for the rim to be centered between the locknuts of the hub, or "dished". To check this, and to make precision adjustments, a wheel alignment gauge (also called a "dishing tool") is a must. An accurate and truly versatile wheel alignment gauge that belongs along side every truing stand.

Tagged:

6tTUqGZ3z_g_0_195x145 Video demonstration for: Professional Wheel Truing Stand

TS-2.2 Professional Wheel Truing Stand

 

More info: http://www.parktool.com/product/professional-wheel-truing-stand-ts-2-2 The world's most popular wheel truing stand and the standard of the bicycle industry for 35 years is now, more than ever, the stand to choose for daily shop use. The new TS-2.2 combines time-tested functions from the legendary TS-2 with new features to make it more accurate and versatile than ever.

Tagged:

CT-11 RIvet Peening Tool for Campagnolo (R) 11-Speed Chain

 

More info: http://www.parktool.com/product/rivet-peening-tool-for-campagnolo-11-speed-chain-ct-11 After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process.

Tagged:

BPVlDskstd8_0_195x145 Video demonstration for: Team Race Stand

PRS-20

 

For more info: http://www.parktool.com/product/team-race-stand-prs-20 The new PRS-20 Team Race Stand is a compact, Euro-style work stand that securely holds the bike without clamping the frame tubes or seat post. Ideal for bikes with ultra lightweight frame tubes and seatposts, and for bikes with tight access areas that can't be clamped.

Tagged:

A9FLVPeQF7Y_0_195x145 Video demonstration for: Team Issue Repair Stand

PRS-25

 

More info: http://www.parktool.com/product/team-issue-repair-stand-prs-25 Designed from the ground up....literally...to create what we believe is the finest folding stand available. Lightweight, stable and packed with features: Quickly and easily folds to 47" Clamping height adjusts up to 60" Proprietary Hexatude hex-shaped aluminum tubing ensures low flex and no rotation Aluminum leg straps ensure all parts slide, fold and unfold together

Tagged:

VdoOlBR2lJY_0_195x145 Video demonstration for: I-Beam Mini Fold-Up with Chain Tool

IB-3 I-Beam Mini Fold Up Hex Wrench/Screwdriver/Star Driver Set

 

For more info: http://www.parktool.com/product/i-beam-mini-fold-up-with-chain-tool-ib-3 A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver Straight blade screw driver Composite wrapped tire lever two spoke wrenches One size equal to SW-0, black, for 3.23mm nipples Second size equal to SW-2, red, for 3.45mm nipples 10-speed compatible chain tool Nominal dimensions: 3.5" x 1.6" x 1" (90mm x 40mm x 25mm) Weight 6 ounces (170 grams)

Tagged:

S4-fjrkkcYs_0_195x145 This video is used in the following articles:

DT-4 Disc Brake Post Mount Facing Tool

 

More info: http://www.parktool.com/blog/repair-help/post-mount-disc-brake-facing-with-dt-4 This video will review the use of the DT-4 Disc Brake Post Mount Facing Tool

Tagged:

O44Vk9P1HV4_0_195x145 Video demonstration for: Cassette Lockring Tool

FR-5G

 

More info: http://www.parktool.com/product/freewheel-remover-fr-5g Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings Also Fits Shimano disc brake lockrings Guide pin stabilizes tool

Tagged:

NHkXh8UQaz0_0_195x145 Video demonstration for: Cassette Lockring Tool

FR-5_web

 

More info: http://www.parktool.com/product/cassette-lockring-tool-fr-5 Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. Fits Shimano®, SRAM®, SunRace®, SunTour®, Chris King® and other cassette lockrings. The FR-5 has 12 splines that are approximately 23.4mm across Also fits Shimano disc brake lockrings.

Tagged:

Kxqu6Tcsb_g_0_195x145 Video demonstration for: Dial Adjust Frame Pump

PMP-5

 

This video will show the features of the PMP-5 Dial Adjust Frame Pump by Park Tool

Tagged:

CBP-3

 

More info: http://www.parktool.com/product/campagnolo-bearing-puller-and-installation-set-cbp-3 Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller's forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system "pulls" the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer.

Tagged:

DG-BlpWOB3Y_0_195x145 Video demonstration for: Portable Workbench

PB-1 Demonstration

 

More info: http://www.parktool.com/product/portable-workbench-PB-1 Perfect for taking to races and rides, the PB-1 is a workbench that folds for easy transport and storage.

Tagged:

Jko42C3TBus_0_195x145 Video demonstration for: Internal Seat Tube Clamp

ISC-4 Demonstration

 

More info: http://www.parktool.com/product/internal-seat-tube-clamp-isc-4 Clamping directly to freshly painted or ultra thin-walled frame tubing can cause inadvertent damage. The new ISC-4 securely holds most bikes without clamping on any frame tube. To use, simply insert the ISC-4 into the frame's seat tube, tighten the knob, and clamp into any Park Tool Repair Stand. The ISC-4's hex-shaped shaft resists twisting while clamped in the stand. Works with a huge range of seat tube sizes—anything with an inside diameter of 24mm to 32mm.

Tagged:

 

More info: http://www.parktool.com/product/cyclone-r-chain-scrubber-CM-5 Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean.

Tagged: Chain Cleaning Repair

FBO6OwQAwXg_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-9 Demonstration

 

More info: http://www.parktool.com/product/bottom-bracket-tool-BBT-9 The Park Tool BBT-9 Bottom Bracket Tool is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap.

Tagged:

SRAM Torpedo Hub Service- part 3

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

Chain Tension with the SRAM Torpedo Fixe-Freewheel Hub - Part 2

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

Chain Tension with the SRAM Torpedo Fixe-Freewheel Hub- part 1

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

SRAM Torpedo Hub Service- part 4

 

This is a video of the service of the SRAM Torpedo Hub.

Tagged:

SRAM Torpedo Hub Service- part 2

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

SRAM Torpedo Fixie-Freewheel Hub Service-part 1

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

JKMotH68F-w_0_195x145 Video demonstration for: Chain Checker

CC-2

 

To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading.

Tagged:

YS69VTz6Px4_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-22

 

More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

CIkT48qt_UA_0_195x145 Video demonstration for: Bottom Bracket Tool

BBT-19 Demonstration

 

The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench.

Tagged:

Ddw8AnCbm_c_0_195x145 Video demonstration for: Dial Indicator Kit

DT-3i

 

A dial indicator kit that bolts to the DT-3 rotor truing gauge, allowing for greater accuracy and a way to measure and quantify results. More info at http://www.parktool.com/product/dial-indicator-kit-DT-3i

Tagged:

AW-5FntSFms_0_195x145 Video demonstration for: Rotor Truing Gauge

DT-3

 

Accurately gauge the straightness of disc brake rotors while the wheel is mounted in a TS-2.2 or TS-2 Professional Wheel Truing Stand. The DT-3 features an infinitely adjustable, finely threaded indicator gauge. Works with any diameter brake rotor. More info at http://www.parktool.com/product/DT-3

Tagged:

KnmUscLHv3E_0_195x145 Video demonstration for: Adjusting Cap Tool

BBT-10

 

The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10

Tagged:

TW-5

 

With today's lightweight components, torque wrench use in the shop is no longer an option—it's a must for every mechanic. The TW-5 is a high quality, ratcheting, click type torque wrenches that accurately measure and apply the proper amount of torque to a component's threaded fastener(s). Comes with its own protective case. More info at http://www.parktool.com/product/ratcheting-click-type-torque-wrenches

Tagged:

TS-2Di

 

A dial indicator bracket and set that measures a wheel's lateral and radial run-out to .01mm • Mounts easily to any TS-2 or TS-2.2 Truing Stand • Enables user to set and follow tolerances for each wheel • Includes two dials, mounting brackets and specially designed tips. More info at http://www.parktool.com/product/dial-indicator-gauge-set-for-ts-2-2-and-ts-2-truing-stands-ts-2di

Tagged:

GMuOIaVonrI_0_195x145 This video is used in the following articles:

Crank Removal Square Spindle Type

 

This video provides a simple overview of square spindle type cranks.

Tagged:

W-mutvqhZZ4_0_195x145 This video is used in the following articles:

Installation of Square Type Cranks.mov

 

Tagged:

CJCKm6DG-NQ_0_195x145 This video is used in the following articles:

FR 5 use

 

Use of the FR-5 cassette lockring removal and installation

Tagged:

O64GFXBZtDA_0_195x145 Video demonstration for: Friction Fit Dummy Pedal

DP-1_11-2-10

 

DP-1_11-2-10

Tagged:

ENWY0ETLx7g_0_195x145 This video is used in the following articles:

CX GreenAcres Creaking

 

Tagged:

6rt6SqoPaBs_0_195x145 This video is used in the following articles:

CX corn field repair

 

Tagged:

XfGSCfrs-mU_0_195x145 This video is used in the following articles:

CX_GreenAcres_Cash_Hill.m4v

 

Tagged:

Professional Micro-Adjust Repair Stand Clamps

 

Tagged:

0S2rY9z31TA_0_195x145 This video is used in the following articles:

JR Ranch Cyclo-cross Cat 4's at barriers

 

Tagged:

_x6SAQzBDi4_0_195x145 This video is used in the following articles:

JR Ranch kids race

 

Tagged:

BNg_7-AhuJs_0_195x145 This video is used in the following articles:

JR_Ranch_Cyclo_Cross_cowbells

 

Top of climb at JR Ranch Cyclo-Cross with cowbells

Tagged:

H6iNp2a8JkQ_0_195x145 Video demonstration for: Home Mechanic Wheel Truing Stand

TS-8 Demonstration

 

Designed especially for the home mechanic, the TS-8 allows accurate wheel truing at an economical price. Accepts wheels from 16" to 29", with or without the tire mounted. Innovative sliding dropout allows quick wheel installation, no matter what the hub width (up to 170mm). Dishing (centering) is performed by simply flipping the wheel in the stand. Constructed from heavy gauge steel to resist flexing, the TS-8 can be used freestanding or bolted to a bench for extra stability.

Tagged:

497ULB88hEw_0_195x145 Video demonstration for: Deluxe Threadless Nut Setter

TNS-4 Demonstration

 

The TNS-4 makes it quick and easy to install star-fangled nuts used with 1" and 1-1/8" threadless headset systems. Using a durable steel driver and built-in guide, the TNS-4 perfectly aligns the star-fangled nut and sets it to the proper depth every time. The unique design virtually eliminates pinched fingers. Replaceable set screw (#822).

Tagged:

AY13eJGlL9U_0_195x145 Video demonstration for: Rescue Tool

MTB-7 Demonstration

 

An outstanding value, the quality MTB-7 Rescue Tool is packed with 21 useful tools for emergency repairs on the road or trail. Includes nylon carrying case with embroidered Park Tool logo. Tools included: 2, 2.5, 3, 4, 5, 6, & 8mm hex wrenches Tire levers (2) Phillips head screwdriver Straight blade screwdriver T25 star-shaped driver 0.127", 0.130", & 0.136" spoke wrenches 8, 9, & 10mm box end wrenches Chainring nut wrench Dust cap remover Serrated knife Bottle opener

Tagged:

6Aejv_psHXk_0_195x145 This video is used in the following articles:

XC-bike-prep-2010.mov

 

This is a pre-event checklist produced for US World Championship XC Team members. Please also refer to the pdf checklist in your World's Manual. For Gravity bikes, see http://www.youtube.com/watch?v=XvwBgB75x6s The USA Team Mechanics look forward to serving you in Quebec.

Tagged: USA Cycling

XvwBgB75x6s_0_195x145 This video is used in the following articles:

DH_bikeprep.mov

 

This is a pre-event checklist produced for US World Championship Gravity Team members. Please also refer to the pdf checklist in your World's Manual. For XC bikes, see http://www.youtube.com/watch?v=6Aejv_psHXk The USA Team Mechanics look forward to serving you in Quebec.

Tagged:

HfEseCEp91E_0_195x145 This video is used in the following articles:

Cycle Speedway - Euro Club Champs Final 2010

 

http://www.cyclespeedway.tv Cycle Speedways 2010's European Club Championship Final saw two British clubs and two Polish clubs battle it out for the title. http://www.cyclespeedway.tv Between Horspath, Wednesfield, Zielona Gora and Leszno are some of the best riders in the world and the final was set to be a close run thing. Video shot and edited by http://www.kettlegun.co.uk Sponsored by: http://www.cycleoxford.coop Coming soon: http://www.cyclespeedway.tv Music: http://www.klang.org.uk

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged: