Home > Park Tool Videos

Park Tool Videos

Xc6ZR55Hojw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 4 of 12

 

This video is part of a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bar, stem, brake lever, shift lever assembly and the installation of the fork into the frame. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

LRL0WsGDMhc_0_195x145 This video is used in the following articles:

How to Build a Bike-part 3 of 12

 

This video is the third in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of headset installation, fork length sizing and fork column cutting. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

7OWmC8NYXI4_0_195x145 This video is used in the following articles:

How to Build a Bike-part 2 of 12

 

This video is the second in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bottom bracket installation, crankset installation, and pedal installation. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

K2QvjC6k17A_0_195x145 This video is used in the following articles:

How to build a bike-part 1 of 12

 

This video is the first in a series that will review the process of how to build a bike from frame and component parts to the complete machine. The sample equipment may or may not be applicable to your particular situation and your particular bike. Part 1 gives an introduction to the process and will review frame and fork machining. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

EoMJlbIZODw_0_195x145 This video is used in the following articles:

Calvin's Corner: Tokheim Shifting System- part 1

 

See the full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system A close up look of the Tokheim Shifting System as it runs through the gears, all five of them.

Tagged:

Gx7mqDWmNss_0_195x145 This video is used in the following articles:

Tokheim Gear Shifting System-Calvin's Corner Article

 

See full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system This video is a review of the shifting system from the Tokheim Corporation.

Tagged:

Product Demonstration: CBP-5 Bearing and Crank puller adaptor set for Campagnolo(R) Power-Torque

 

Product highlights of the CBP-5 puller adaptor set See also http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque

Tagged:

-jDgFvThIbI_0_195x145 This video is used in the following articles:

The Pits

 

Video working the Pits at the at the 2012 US Cyclocross Nationals in Madison "Verona" WI. This was shot working "The Pits" for the Mens 35-39 race.

Tagged:

OmbfDqIig8Q_0_195x145 This video is used in the following articles:

CX Madison 2012 Power Washing in the Pits

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 A close up view of the mud removal during the 2012 Cyclo-cross Championships in Madison, Wisconsin.

Tagged:

RHtrMev1ubA_0_195x145 This video is used in the following articles:

2012 Cyclo-Cross Championship- bike swap

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 View from the pits at the USA 2012 Cyclo-Cross Championship in Madison Wisconsin. First is the lead off lap of the Elite Men. The second part are some bike swaps during the Collegiate division.

Tagged:

CBP-5 Service of Campagnolo Power Torque cranks

 

http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque This video reviews the removal of the Campagnolo Power Torque cranks

Tagged:

CBP-5 Bearing and Puller Adaptor Set for Power Torque cranks

 

http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque This video reviews the service of the drive side bearing on the Power Torque cranks

Tagged:

KSIDsXVP4bI_0_195x145 This video is used in the following articles:

USAC Race Mechanic Clinic-2011-Wheel change session

 

USA Cycling hosts the Bill Woodul Race Mechanic Clinic. Mechanics attend 4 days of class on being a race mechanic. This are some out takes from the wheel change session.

Tagged:

RcAK0kTJS-M_0_195x145 This video is used in the following articles:

Soutěž mechaniků Bike Brno 2011 - FASTEST TOOL CONTEST

 

Mezinárodní soutěž cyklomechaniků na veletrhu Bike Brno 2011 - sobotní finále - výměna přední duše poslepu Bike Mechanics International Contest at Bike Brno 2011 - Saturday´s finale - they had to change the front tube "blindfolded"

Tagged:

Sf8l8945Sg4_0_195x145 Video demonstration for: Home Mechanic Floor Pump

PFP-6 use on Presta and Schrader vales

 

http://www.parktool.com/product/home-mechanic-floor-pump-pfp-6 Using the PFP-6 Home Mechanic Floor Pump.

Tagged:

FuE94frfQYg_0_195x145 Video demonstration for: Professional Mechanic Floor Pump

PFP-4 use on Presta and Schrader vales

 

http://www.parktool.com/product/professional-mechanic-floor-pump-pfp-4 Using the PFP-4 Professional Mechanic Floor pump.

Tagged:

Za_SgFq6vDM_0_195x145 This video is used in the following articles:

Mont-Cenis - Last Ride & Conclusion

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The final test ride for the Mont-Cenis.

Tagged:

VyvAJEdV6MI_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issue

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Compatibility issues with the chain and rear cogs of the Maillard hub

Tagged:

LnPelyB376I_0_195x145 This video is used in the following articles:

Mont- Cenis Brake Squeal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Mont-Cenis test ride reveals brake squeal and shifting problems

Tagged:

QYWgXumw8ew_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issues

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Chain concerns on the Mont-Cenis

Tagged:

VZRmncs4eho_0_195x145 This video is used in the following articles:

Mont-Cenis Handlebar Wrap

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Handlebar wrap on the Mont-Cenis

Tagged:

Zt-jT7cKpUw_0_195x145 This video is used in the following articles:

Mont Cenis-Rear Derailleur

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The rear derailleur cage is badly bent and must be straightened.

Tagged:

NFNabpfDENo_0_195x145 This video is used in the following articles:

Mont-Cenis- Review of Progress

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A review of how things look on the reconditioning of the Peugeot Mont-Cenis

Tagged:

7aAaVOH7DNI_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Seat Post Removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult removal of the seat post assembly on the Mont-Cenis

Tagged: