Home > Park Tool Videos

Park Tool Videos

1Ca9SDR3CTw_0_195x145 This video is used in the following articles:

Basic Tool Use- Pliers, Adjustable Wrenches

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

HmqGow3mFJM_0_195x145 This video is used in the following articles:

Basic Tool Use-Files, Hands

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

44_cLGqt5oE_0_195x145 This video is used in the following articles:

Basic Tool Use-Hammer

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

Bc8bIiPRjSg_0_195x145 Video demonstration for: Extreme Range Clamp

100-7X Exteme Range Clamp- Product Demonstration

 

http://www.parktool.com/product/extreme-range-clamp-100-7x This is a demonstration of the 100-7X Exteme Range Clamp- Product Demonstration

Tagged:

TsLsh2gCSlU_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Bending Wheels

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a trail side repair of a bent wheel.

Tagged:

5dkTGTqUUWc_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Crank and Pedal

 

This video reviews repairs made while on-the-ride to a loose crank and loose pedal.

Tagged:

GvMep9y7d7c_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-RideRepair, Bent Chainrings

 

See full article at: http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review how to re-bend a chainring in a trailside repair procedure.

Tagged:

SWWjaslstOE_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Trialside Flats

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trailside repair of a flat tire and patching with the GP-2 Super Patch Kit

Tagged:

AU6JDcNqJDs_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, Bent Derailleuer Hanger

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews an on-the-ride repair of a bent derailleur hanger.

Tagged:

JavQgMQukxQ_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, One Speed Conversion

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review the trailside conversion of a derailleur bike to a 1-speed.

Tagged:

JBboW5Ewxdw_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Pre-Ride Inspection

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a pre-ride inspection of the bicycle.

Tagged:

7ltfJeYSDIs_0_195x145 This video is used in the following articles:

On The Ride Repairs- cut tires and patching with the VP-1

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews the on-the-ride procedure for booting a ripped tire and patching an inner tube with the VP-1 Vulcanizing Patch Kit

Tagged:

SWEbq5Ry63Q_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, trail side wheel truing from a broken spoke

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trail side repair of a broken spoke

Tagged:

SG-8 Saw Guide for Carbon Composite Forks: Product Demonstration

 

Video demonstration of the SG-8 Saw Guide. See also: http://www.parktool.com/product/threadless-saw-guide-for-carbon-composite-forks-sg-8

Tagged:

UO0YQ_kd-O0_0_195x145 This video is used in the following articles:

Calvin's Corner: Springtime Chain Cleaning with the CM-5.2

 

This video will review the use of the CM-5.2 Cyclone Chain Scrubber. See the full article on Springtime maintenance at: http://www.parktool.com/blog/calvins-corner/springtime-attention-brings-problem-prevention

Tagged:

Product Demonstration: TS-25 Repair Stand Mounted Truing Stand

 

This video is a Product Demonstration of the TS-25 Repair Stand Mounted Truing Stand. The TS-25 mounts to a bicycle repair stand to allow wheel truing. See product at http://www.parktool.com/product/repair-stand-mounted-wheel-truing-stand-ts-25

Tagged:

0tt0BeZK4E0_0_195x145 This video is used in the following articles:

How to Build a Bike-part 11 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the adjustments to the hydraulic brakes. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

SZOJZA9ybag_0_195x145 This video is used in the following articles:

How to build a bike - part 12 of 12

 

This is the final video of the process of how to build a bike from frame and component parts to the complete machine. This video reviews a few final considerations and details before sending the newly assembled bike on the first test ride. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

P2BKIetBU9o_0_195x145 This video is used in the following articles:

How to Build a Bike-part 10 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the front derailleur adjustments. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged:

D8nk50i8J6k_0_195x145 This video is used in the following articles:

How to Build a Bike-part 8 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the sizing, cutting and installation of the chain. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

NjBNTGocP38_0_195x145 This video is used in the following articles:

How to Build a Bike-part 9 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur adjustments to limit screws and index settings. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

TPhsSTR5ybw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 7 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the installation of front and rear derailleur, and the routing of the cable housing. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

ZjcmnV1MVxk_0_195x145 This video is used in the following articles:

How to Build a Bike-part 6 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur hanger alignment. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged:

Q9W1CJN-WRY_0_195x145 This video is used in the following articles:

How to Build a Bike-part 5 of 12

 

This is a series of videos that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of cassette installation and converting a rim to a tubeless tire system. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment 7. Derailleur installation and cable housing routing 8. Chain length sizing and installation 9. Installation of front and rear derailleurs 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: