Home > Park Tool Videos
Park Tool Videos
|
MLP-1 Demonstration
More info: http://www.parktool.com/product/master-link-pliers-MLP-1 Many derailleur chains use a "master link" that allows the chain to be installed and removed by hand. While this type of masterlink doesn't require a traditional chain tool, over time, dirt and corrosion can make it difficult to separate by hand. MLP-1 Master Link Pliers make removal and replacement of these masterlinks quick and effortless. Simply insert the specially sized jaws into the masterlink and squeeze the handles. |
|
CT-11 RIvet Peening Tool for Campagnolo (R) 11-Speed Chain
More info: http://www.parktool.com/product/rivet-peening-tool-for-campagnolo-11-speed-chain-ct-11 After pressing the special connecting rivet into a Campagnolo 11-Speed Chain and breaking off the pilot, Campagnolo requires the end of the connecting rivet to be "peened" or "deformed" to prevent chain failure. The precision-machined CT-11 is used to accurately perform this critical process. |
|
IB-3 I-Beam Mini Fold Up Hex Wrench/Screwdriver/Star Driver Set
For more info: http://www.parktool.com/product/i-beam-mini-fold-up-with-chain-tool-ib-3 A complete take-along tool combining our award winning I-Beam technology with a full array of emergency tools: 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm hex wrenches T25 star driver Straight blade screw driver Composite wrapped tire lever two spoke wrenches One size equal to SW-0, black, for 3.23mm nipples Second size equal to SW-2, red, for 3.45mm nipples 10-speed compatible chain tool Nominal dimensions: 3.5" x 1.6" x 1" (90mm x 40mm x 25mm) Weight 6 ounces (170 grams) |
|
More info: http://www.parktool.com/product/cyclone-r-chain-scrubber-CM-5 Keeping your chain clean is an essential part of good bike maintenance. The CM-5 Cyclone Chain Scrubber uses an extra large solvent reservoir and a series of rotating brushes to get chains really clean. |
|
CC-2
To alleviate poor shifting and uneven drive train wear, manufacturers recommend chain replacement before rear cog replacement. Now you can quickly and accurately determine the wear and stretch of any chain with the Park Tool Chain Checker. Simply insert the Chain Checker's pins into two links, press the swing arm gauge tight, and then check the gauge window for an accurate reading. More info: http://www.parktool.com/product/chain-checker-cc-2 The CC-2 is 10 and 11 speed compatible. For the modern 9 and 10 speed chains, replace chain at or just before the 0.75% readings. For the 11 speed chain, replace at or just before the 0.5% reading. |
