Home > Park Tool Videos
Park Tool Videos
|
Product Demonstration: CBP-5 Bearing and Crank puller adaptor set for Campagnolo(R) Power-Torque
Product highlights of the CBP-5 puller adaptor set See also http://www.parktool.com/blog/repair-help/cbp-5-use-on-power-torque |
|
BBT-30.3 Bottom Bracket Tool Set
http://www.parktool.com/product/bottom-bracket-tool-set-for-bb30-bbt-30-3 The BBT-30.3 includes a bearing remover, which slides through the bottom bracket shell and into the bearing so it can be tapped out with a hammer. The set also includes two installation bushings #668 designed for the BB30 and PF30 bearings. |
|
CBP-3
More info: http://www.parktool.com/product/campagnolo-bearing-puller-and-installation-set-cbp-3 Designed and built to install and remove the pressed bearing used on Campagnolo® and Fulcrum® Ultra-Torque cranks. The bearing puller's forged arms and tapered edges securely pinch under the bearing while the heavy-duty plunger system "pulls" the bearing. The installation tool precisely fits both the crank spindle and the press fit bearing to ensure proper installation. Just tap the bearing into place using the tool and a hammer. |
|
BBT-9 Demonstration
More info: http://www.parktool.com/product/bottom-bracket-tool-BBT-9 The Park Tool BBT-9 Bottom Bracket Tool is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. |
|
BBT-22
More info: http://www.parktool.com/product/bottom-bracket-tool-bbt-22 The Park Tool BBT-22 bottom bracket tool is a shop quality tool for installing and removing Shimano® and ISIS Drive® splined 20-tooth bottom bracket cups. Made from investment cast steel, the BBT-22 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup. Can be used with a 3/8" drive torque wrench, 3/8" ratchet driver, 32mm wrench, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
BBT-19 Demonstration
The Park Tool BBT-19 bottom bracket tool is a heavy duty, shop quality tool for installing and removing 16-notch external bearing bottom bracket cups. Made from investment cast steel, the BBT-19 can be used with either a 3/8" drive torque wrench, 3/8" ratchet driver, FRW-1 Freewheel Remover Wrench, or 1" wrench. |
|
BBT-10
The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the strength and leverage needed to remove seized caps. Find more information on the Park Tool website: http://www.parktool.com/product/adjusting-cap-tool-BBT-10 |
