Home > Park Tool Videos

Park Tool Videos

KLjuv6i3EhI_0_195x145 This video is used in the following articles:

The Work Horses of Park Tool

 

This video looks at just a few of the factory floor bikes we use at the Park Tool Headquarters in Minnesota.

Tagged:

KKZWUPsdZL8_0_195x145 This video is used in the following articles:

2013 USA Cycling Cyclo-cross National Championships Live Webcast

 

2013 USA Cycling Cyclo-cross National Championships Live webcast of the Elite races - Sunday, January 13 Badger Prairie Park, Verona, WI Live stream schedule CST time zone 1:00 p.m. CST -- Women's Elite/U23 -- 40 minutes 2:15 p.m. CST -- Men's Elite -- 60 minutes

Tagged:

ZQ0u0hlJuhs_0_195x145 This video is used in the following articles:

Free Bikes For Kids-Two interesting bikes

 

A folding Fuji that is not appropriate for the Free Bikes For Kids, and a MTB with a broken spindle

Tagged:

1KMQE8AayfE_0_195x145 This video is used in the following articles:

Free Bikes For Kids: A tour by the sIte mangaer

 

Free Bikes For Kids program and a tour by SIte Mangaer Mark Eumurian

Tagged:

LKaPg-7Yz-Q_0_195x145 This video is used in the following articles:

Free Bikes For Kids- tour of facility

 

Free Bikes For Kids- tour of facility

Tagged:

-dR269cijDk_0_195x145 This video is used in the following articles:

Free Bike For Kids- A Sample Repair

 

This video shows a sample bike repair for the "Free Bikes For Kids" program

Tagged:

Pzt0_grmj80_0_195x145 This video is used in the following articles:

2012 MTB Downhill World Championships-finals day

 

This video gives a view of what mechanics do at the top of a MTB downhill race, shot at the 2012 MTB World Championships in Leogang, Austria. See the related article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

Hg1i7TGt5N4_0_195x145 This video is used in the following articles:

2012 MTB Worlds-after the DH racing

 

This video shows that it like after the racing is done at a World Championships. Bikes are cleaned, riders are packing up, and general chaos rules the afternoon. See the related article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

1AFwpO9EClw_0_195x145 This video is used in the following articles:

2012 MTB Worlds- USA TEAM SHOP TOUR

 

This is a video tour of our basement workshop at the 2012 MTB World Championships. This is the location for the USA TEAM SHOP.

Tagged:

MMHGB0fmV5g_0_195x145 This video is used in the following articles:

2012 MTB Worlds Power Washing

 

A short video example of ppwer wash of downhill racing bikes at the 2012 MTB World Championships in Leogang, Austria. See the related blog article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

6nkBd06whu8_0_195x145 This video is used in the following articles:

2012 MTB Worlds Washing-a gentle wash

 

A short video example of gentle wash of downhill racing bikes at the 2012 MTB World Championships in Leogang, Austria. See the related blog article at http://www.parktool.com/blog/calvins-corner/2012-mtb-world-championships

Tagged:

CnIwmNbYkXQ_0_195x145 This video is used in the following articles:

XC bike prep 2010 mov

 

This video is an overview of pre-race preparation of XC race bikes. This video was created for use by the USA Cycling Team.

Tagged:

GUpRAF6vuAk_0_195x145 This video is used in the following articles:

Downhill Bike Pre-Race Preperation

 

This video is an overview of pre-race preparation of DH race bikes. This video was created for use by the USA Cycling Team.

Tagged:

6qO8NnynMUk_0_195x145 This video is used in the following articles:

Basic Tool Use-Hacksaw

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged: Clamp Repair stand

_QYF9bk22tU_0_195x145 This video is used in the following articles:

Basic Tool Use-Screwdrivers, Knife

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged: Clamp Repair

1Ca9SDR3CTw_0_195x145 This video is used in the following articles:

Basic Tool Use- Pliers, Adjustable Wrenches

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged: Clamp Repair

HmqGow3mFJM_0_195x145 This video is used in the following articles:

Basic Tool Use-Files, Hands

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged: Clamp Repair

44_cLGqt5oE_0_195x145 This video is used in the following articles:

Basic Tool Use-Hammer

 

This video is part of a series reviewing basic tool use from the article at http://www.parktool.com/blog/calvins-corner/basic-use-of-tools

Tagged:

TsLsh2gCSlU_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Bending Wheels

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a trail side repair of a bent wheel.

Tagged: Repair Wheel bent bikes

5dkTGTqUUWc_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Crank and Pedal

 

This video reviews repairs made while on-the-ride to a loose crank and loose pedal.

Tagged: Crank Pedal Repair bikes

GvMep9y7d7c_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-RideRepair, Bent Chainrings

 

See full article at: http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review how to re-bend a chainring in a trailside repair procedure.

Tagged: Crank Pedal Repair bikes

SWWjaslstOE_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Trialside Flats

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trailside repair of a flat tire and patching with the GP-2 Super Patch Kit

Tagged: Crank Pedal Repair bikes

AU6JDcNqJDs_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, Bent Derailleuer Hanger

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews an on-the-ride repair of a bent derailleur hanger.

Tagged: Crank Pedal Repair bikes

JavQgMQukxQ_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repair, One Speed Conversion

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video will review the trailside conversion of a derailleur bike to a 1-speed.

Tagged: Crank Pedal Repair bikes

JBboW5Ewxdw_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Pre-Ride Inspection

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a pre-ride inspection of the bicycle.

Tagged: Crank Pedal Repair bikes

7ltfJeYSDIs_0_195x145 This video is used in the following articles:

On The Ride Repairs- cut tires and patching with the VP-1

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews the on-the-ride procedure for booting a ripped tire and patching an inner tube with the VP-1 Vulcanizing Patch Kit

Tagged: Repair Tire Tube bikes boot inner patch

SWEbq5Ry63Q_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, trail side wheel truing from a broken spoke

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trail side repair of a broken spoke

Tagged: broken spoke mtb repair wheel true

UO0YQ_kd-O0_0_195x145 This video is used in the following articles:

Calvin's Corner: Springtime Chain Cleaning with the CM-5.2

 

This video will review the use of the CM-5.2 Cyclone Chain Scrubber. See the full article on Springtime maintenance at: http://www.parktool.com/blog/calvins-corner/springtime-attention-brings-problem-prevention

Tagged: Chain Cleaning bike

0tt0BeZK4E0_0_195x145 This video is used in the following articles:

How to Build a Bike-part 11 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the adjustments to the hydraulic brakes. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

SZOJZA9ybag_0_195x145 This video is used in the following articles:

How to build a bike - part 12 of 12

 

This is the final video of the process of how to build a bike from frame and component parts to the complete machine. This video reviews a few final considerations and details before sending the newly assembled bike on the first test ride. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

P2BKIetBU9o_0_195x145 This video is used in the following articles:

How to Build a Bike-part 10 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the front derailleur adjustments. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

D8nk50i8J6k_0_195x145 This video is used in the following articles:

How to Build a Bike-part 8 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the sizing, cutting and installation of the chain. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

NjBNTGocP38_0_195x145 This video is used in the following articles:

How to Build a Bike-part 9 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur adjustments to limit screws and index settings. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

TPhsSTR5ybw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 7 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the installation of front and rear derailleur, and the routing of the cable housing. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

ZjcmnV1MVxk_0_195x145 This video is used in the following articles:

How to Build a Bike-part 6 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur hanger alignment. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

Q9W1CJN-WRY_0_195x145 This video is used in the following articles:

How to Build a Bike-part 5 of 12

 

This is a series of videos that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of cassette installation and converting a rim to a tubeless tire system. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment 7. Derailleur installation and cable housing routing 8. Chain length sizing and installation 9. Installation of front and rear derailleurs 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

Xc6ZR55Hojw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 4 of 12

 

This video is part of a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bar, stem, brake lever, shift lever assembly and the installation of the fork into the frame. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

LRL0WsGDMhc_0_195x145 This video is used in the following articles:

How to Build a Bike-part 3 of 12

 

This video is the third in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of headset installation, fork length sizing and fork column cutting. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

7OWmC8NYXI4_0_195x145 This video is used in the following articles:

How to Build a Bike-part 2 of 12

 

This video is the second in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bottom bracket installation, crankset installation, and pedal installation. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

K2QvjC6k17A_0_195x145 This video is used in the following articles:

How to build a bike-part 1 of 12

 

This video is the first in a series that will review the process of how to build a bike from frame and component parts to the complete machine. The sample equipment may or may not be applicable to your particular situation and your particular bike. Part 1 gives an introduction to the process and will review frame and fork machining. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: 28284271 bike building How-to

EoMJlbIZODw_0_195x145 This video is used in the following articles:

Calvin's Corner: Tokheim Shifting System- part 1

 

See the full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system A close up look of the Tokheim Shifting System as it runs through the gears, all five of them.

Tagged: Bicycle Howto Calvins corner bicycle park tool shifting

Gx7mqDWmNss_0_195x145 This video is used in the following articles:

Tokheim Gear Shifting System-Calvin's Corner Article

 

See full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system This video is a review of the shifting system from the Tokheim Corporation.

Tagged: Tokheim

-jDgFvThIbI_0_195x145 This video is used in the following articles:

The Pits

 

Video working the Pits at the at the 2012 US Cyclocross Nationals in Madison "Verona" WI. This was shot working "The Pits" for the Mens 35-39 race.

Tagged: Calvin Jones Cyclo-cross Madison Mechanic Nationals Planet Bike Racing Red Line Chemistry Shimano US USA Cycling USAC Ultragigantor Verona bike cyclocross 2012 masters muddy pit powerwasher race veldrijden

OmbfDqIig8Q_0_195x145 This video is used in the following articles:

CX Madison 2012 Power Washing in the Pits

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 A close up view of the mud removal during the 2012 Cyclo-cross Championships in Madison, Wisconsin.

Tagged: Outdoor Sports washing 2012 CX Madison

RHtrMev1ubA_0_195x145 This video is used in the following articles:

2012 Cyclo-Cross Championship- bike swap

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 View from the pits at the USA 2012 Cyclo-Cross Championship in Madison Wisconsin. First is the lead off lap of the Elite Men. The second part are some bike swaps during the Collegiate division.

Tagged: Riding bicycle cyclocross

KSIDsXVP4bI_0_195x145 This video is used in the following articles:

USAC Race Mechanic Clinic-2011-Wheel change session

 

USA Cycling hosts the Bill Woodul Race Mechanic Clinic. Mechanics attend 4 days of class on being a race mechanic. This are some out takes from the wheel change session.

Tagged: Wheel change

Za_SgFq6vDM_0_195x145 This video is used in the following articles:

Mont-Cenis - Last Ride & Conclusion

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The final test ride for the Mont-Cenis.

Tagged:

VyvAJEdV6MI_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issue

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Compatibility issues with the chain and rear cogs of the Maillard hub

Tagged:

LnPelyB376I_0_195x145 This video is used in the following articles:

Mont- Cenis Brake Squeal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Mont-Cenis test ride reveals brake squeal and shifting problems

Tagged:

QYWgXumw8ew_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issues

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Chain concerns on the Mont-Cenis

Tagged:

VZRmncs4eho_0_195x145 This video is used in the following articles:

Mont-Cenis Handlebar Wrap

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Handlebar wrap on the Mont-Cenis

Tagged:

Zt-jT7cKpUw_0_195x145 This video is used in the following articles:

Mont Cenis-Rear Derailleur

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The rear derailleur cage is badly bent and must be straightened.

Tagged:

NFNabpfDENo_0_195x145 This video is used in the following articles:

Mont-Cenis- Review of Progress

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A review of how things look on the reconditioning of the Peugeot Mont-Cenis

Tagged:

7aAaVOH7DNI_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Seat Post Removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult removal of the seat post assembly on the Mont-Cenis

Tagged:

Mni9UKWvdx4_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Rear Wheel

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Rear wheel issues and problem on the 1986 Peugeot Mont-Cenis

Tagged:

F-11cuGN83o_0_195x145 This video is used in the following articles:

Mont-Cenis Modolo Brakes

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Rebuilding the Modolo Speedy brakes on the 1086 Peugeot Mont-Cenis

Tagged:

FBI3dlWhXV4_0_195x145 This video is used in the following articles:

Mont-Cenis Bottom Bracket Removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult removal of the Campagnolo bottom bracket from the Mont-Cenis

Tagged:

DW2WmcvfWwE_0_195x145 This video is used in the following articles:

Mont-Cenis-crank removal

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes A difficult crank removal on the Peugeot Mont-Cenis

Tagged:

J7FvuUj-g0A_0_195x145 This video is used in the following articles:

Peugeot Mont-Cenis Reconditioning-Front Hub

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Front hub issues on the 1986 Mont-Cenis

Tagged:

7jgofUIqYto_0_195x145 This video is used in the following articles:

Reconditioning an old Mont-Cenis 12-speed

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes An overview before the reconditioning work on a Peugeot Mont-Cenis

Tagged:

4jIRGwuSf7U_0_195x145 This video is used in the following articles:

Cross Vegas 2011-bike change and service

 

Cross Vegas 2011 action from the tech pits

Tagged: 2011-bike SERVICE and change cross vegas

Jx4c7MxnN-A_0_195x145 This video is used in the following articles:

Cross Vegas 2011 Racing Action

 

Some racing action from the 2011 Interbike show cycle cross raced called CROSS VEGAS.

Tagged: cross vegas

SDhAyuLStwo_0_195x145 This video is used in the following articles:

2011 MTB 4X- front flat

 

A rider has a front flat after his heat of the 4X and the repair must be made quickly

Tagged: 2011 4X- MTB flat front

F15MoVO7ly4_0_195x145 This video is used in the following articles:

Some machining at the 2011 MTB World Championships

 

A drill and file work to reduce the rotor side end up to accept the Shimano spider-type rotors.

Tagged: Container Work

2bzWgla3X6o_0_195x145 This video is used in the following articles:

2011 MTB World Championships U23 first lap

 

Tagged:

Mss7QRoATEU_0_195x145 This video is used in the following articles:

2011 MTB World Championships DH Walk

 

This is a video of the 2011 MTB World Championship DH walking inspection by the US Junior Team.

Tagged: Championships DH MTB Walk World 2011

2-7jVpJikRQ_0_195x145 This video is used in the following articles:

Disc Brake Noise

 

This issue of Calvin's Corner will review a squealing brake.

Tagged:

Chain Tension with the SRAM Torpedo Fixe-Freewheel Hub - Part 2

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

 

This is a video of the service of the SRAM Torpedo Hub

Tagged: Repair biking

 

This is a video of the service of the SRAM Torpedo Hub.

Tagged: bike educational howto instructional video

ENWY0ETLx7g_0_195x145 This video is used in the following articles:

CX GreenAcres Creaking

 

Tagged:

6rt6SqoPaBs_0_195x145 This video is used in the following articles:

CX corn field repair

 

Tagged: Repair

XfGSCfrs-mU_0_195x145 This video is used in the following articles:

CX_GreenAcres_Cash_Hill.m4v

 

Tagged:

0S2rY9z31TA_0_195x145 This video is used in the following articles:

JR Ranch Cyclo-cross Cat 4's at barriers

 

Tagged:

_x6SAQzBDi4_0_195x145 This video is used in the following articles:

JR Ranch kids race

 

Tagged:

BNg_7-AhuJs_0_195x145 This video is used in the following articles:

JR_Ranch_Cyclo_Cross_cowbells

 

Top of climb at JR Ranch Cyclo-Cross with cowbells

Tagged:

6Aejv_psHXk_0_195x145 This video is used in the following articles:

XC-bike-prep-2010.mov

 

This is a pre-event checklist produced for US World Championship XC Team members. Please also refer to the pdf checklist in your World's Manual. For Gravity bikes, see http://www.youtube.com/watch?v=XvwBgB75x6s The USA Team Mechanics look forward to serving you in Quebec.

Tagged: USA Cycling

XvwBgB75x6s_0_195x145 This video is used in the following articles:

DH_bikeprep.mov

 

This is a pre-event checklist produced for US World Championship Gravity Team members. Please also refer to the pdf checklist in your World's Manual. For XC bikes, see http://www.youtube.com/watch?v=6Aejv_psHXk The USA Team Mechanics look forward to serving you in Quebec.

Tagged:

HfEseCEp91E_0_195x145 This video is used in the following articles:

 

http://www.cyclespeedway.tv Cycle Speedways 2010's European Club Championship Final saw two British clubs and two Polish clubs battle it out for the title. http://www.cyclespeedway.tv Between Horspath, Wednesfield, Zielona Gora and Leszno are some of the best riders in the world and the final was set to be a close run thing. Video shot and edited by http://www.kettlegun.co.uk Sponsored by: http://www.cycleoxford.coop Coming soon: http://www.cyclespeedway.tv Music: http://www.klang.org.uk

Tagged:

SRAM Torpedo Fixie-Freewheel Hub Service-part 1

 

Tagged: SERVICE SRAM TORPEDO

SRAM Torpedo Hub Service- part 2

 

This is a video of the service of the SRAM Torpedo Hub

Tagged: Fixie Hub Repair SRAM TORPEDO bike

 

This is a video of the service of the SRAM Torpedo Hub

Tagged:

QMXu2eLxHpU_0_195x145 This video is used in the following articles:

Nuvinci 360 Gear Ratio

 

This video reviews the shifting of the Nuvinci 360 CVP hub.

Tagged:

ZdvqXuiRCXw_0_195x145 This video is used in the following articles:

Nuvinci 360- shift lever cable removal and installation

 

Tagged: N360 Nuvinci Repair help

HayqOg7AV4U_0_195x145 This video is used in the following articles:

 

This video will review the installation of the hub-interface on the Nuvinci N360 hub.

Tagged: Hub Nuvinci interface

I8xBS3sZid0_0_195x145 This video is used in the following articles:

 

This video will review the shifting operation of the Nuvinci 360 hub.

Tagged:

DOzQMg1emFY_0_195x145 This video is used in the following articles:

MTB Worls 2011 Elite Men start

 

Tagged: Elite Men start 2011 MTB Worls

QMu4R5OpFYE_0_195x145 This video is used in the following articles:

 

Tagged: bike ride washing

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged:

No-image_195x145 This video is used in the following articles:

 

Tagged: