Home > Park Tool Videos

Park Tool Videos

JBboW5Ewxdw_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, Pre-Ride Inspection

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews a pre-ride inspection of the bicycle.

Tagged: Crank Pedal Repair bikes

7ltfJeYSDIs_0_195x145 This video is used in the following articles:

On The Ride Repairs- cut tires and patching with the VP-1

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews the on-the-ride procedure for booting a ripped tire and patching an inner tube with the VP-1 Vulcanizing Patch Kit

Tagged: Repair Tire Tube bikes boot inner patch

SWEbq5Ry63Q_0_195x145 This video is used in the following articles:

Calvin's Corner: On-The-Ride Repairs, trail side wheel truing from a broken spoke

 

See full article at http://www.parktool.com/blog/calvins-corner/repairing-on-the-ride This video reviews trail side repair of a broken spoke

Tagged: broken spoke mtb repair wheel true

UO0YQ_kd-O0_0_195x145 This video is used in the following articles:

Calvin's Corner: Springtime Chain Cleaning with the CM-5.2

 

This video will review the use of the CM-5.2 Cyclone Chain Scrubber. See the full article on Springtime maintenance at: http://www.parktool.com/blog/calvins-corner/springtime-attention-brings-problem-prevention

Tagged: Chain Cleaning bike

0tt0BeZK4E0_0_195x145 This video is used in the following articles:

How to Build a Bike-part 11 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the adjustments to the hydraulic brakes. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

SZOJZA9ybag_0_195x145 This video is used in the following articles:

How to build a bike - part 12 of 12

 

This is the final video of the process of how to build a bike from frame and component parts to the complete machine. This video reviews a few final considerations and details before sending the newly assembled bike on the first test ride. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

P2BKIetBU9o_0_195x145 This video is used in the following articles:

How to Build a Bike-part 10 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the front derailleur adjustments. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

D8nk50i8J6k_0_195x145 This video is used in the following articles:

How to Build a Bike-part 8 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the sizing, cutting and installation of the chain. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

NjBNTGocP38_0_195x145 This video is used in the following articles:

How to Build a Bike-part 9 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur adjustments to limit screws and index settings. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

TPhsSTR5ybw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 7 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the installation of front and rear derailleur, and the routing of the cable housing. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

ZjcmnV1MVxk_0_195x145 This video is used in the following articles:

How to Build a Bike-part 6 of 12

 

This video series reviews the process of how to build a bike from frame and component parts to the complete machine. This video reviews the rear derailleur hanger alignment. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

Q9W1CJN-WRY_0_195x145 This video is used in the following articles:

How to Build a Bike-part 5 of 12

 

This is a series of videos that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of cassette installation and converting a rim to a tubeless tire system. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment 7. Derailleur installation and cable housing routing 8. Chain length sizing and installation 9. Installation of front and rear derailleurs 10. Derailleur adjustments, front and rear 11. Hydraulic brake adjustment 12. Finishing the build and fine tuning adjustments

Tagged: Assembly bike build how to

Xc6ZR55Hojw_0_195x145 This video is used in the following articles:

How to Build a Bike-part 4 of 12

 

This video is part of a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bar, stem, brake lever, shift lever assembly and the installation of the fork into the frame. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

LRL0WsGDMhc_0_195x145 This video is used in the following articles:

How to Build a Bike-part 3 of 12

 

This video is the third in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of headset installation, fork length sizing and fork column cutting. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

7OWmC8NYXI4_0_195x145 This video is used in the following articles:

How to Build a Bike-part 2 of 12

 

This video is the second in a series that will review the process of how to build a bike from frame and component parts to the complete machine. This video includes examples of bottom bracket installation, crankset installation, and pedal installation. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: Assembly bike build how to

K2QvjC6k17A_0_195x145 This video is used in the following articles:

How to build a bike-part 1 of 12

 

This video is the first in a series that will review the process of how to build a bike from frame and component parts to the complete machine. The sample equipment may or may not be applicable to your particular situation and your particular bike. Part 1 gives an introduction to the process and will review frame and fork machining. 1. Introduction, headtube facing, fork crown facing http://youtu.be/K2QvjC6k17A 2. Installation of bottom bracket, crankset and pedals http://youtu.be/7OWmC8NYXI4 3. Installation of headset, fork length sizing and fork column cutting http://youtu.be/lRL0WsGDMhc 4. Cockpit assembly (stem, bars, levers) and fork installation into headtube http://youtu.be/Xc6ZR55Hojw 5. Installation of cassette cog. Installation of tubeless tires on wheels and converting to tubeless http://youtu.be/q9W1CJN-WRY 6. Derailleur hanger alignment http://youtu.be/ZjcmnV1MVxk 7. Derailleur installation and cable housing routing http://youtu.be/TPhsSTR5ybw 8. Chain length sizing and installation http://youtu.be/D8nk50i8J6k 9. Adjusting the rear derailleurs http://youtu.be/NjBNTGocP38 10. Front derailleur adjustments http://youtu.be/P2BKIetBU9o 11. Hydraulic brake adjustment http://youtu.be/0tt0BeZK4E0 12. Finishing the build, fine tuning adjustments and rotor burn in http://youtu.be/SZOJZA9ybag

Tagged: 28284271 bike building How-to

EoMJlbIZODw_0_195x145 This video is used in the following articles:

Calvin's Corner: Tokheim Shifting System- part 1

 

See the full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system A close up look of the Tokheim Shifting System as it runs through the gears, all five of them.

Tagged: Bicycle Howto Calvins corner bicycle park tool shifting

Gx7mqDWmNss_0_195x145 This video is used in the following articles:

Tokheim Gear Shifting System-Calvin's Corner Article

 

See full article at http://www.parktool.com/blog/calvins-corner/tokheim-shifting-system This video is a review of the shifting system from the Tokheim Corporation.

Tagged: Tokheim

-jDgFvThIbI_0_195x145 This video is used in the following articles:

The Pits

 

Video working the Pits at the at the 2012 US Cyclocross Nationals in Madison "Verona" WI. This was shot working "The Pits" for the Mens 35-39 race.

Tagged: Calvin Jones Cyclo-cross Madison Mechanic Nationals Planet Bike Racing Red Line Chemistry Shimano US USA Cycling USAC Ultragigantor Verona bike cyclocross 2012 masters muddy pit powerwasher race veldrijden

OmbfDqIig8Q_0_195x145 This video is used in the following articles:

CX Madison 2012 Power Washing in the Pits

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 A close up view of the mud removal during the 2012 Cyclo-cross Championships in Madison, Wisconsin.

Tagged: Outdoor Sports washing 2012 CX Madison

RHtrMev1ubA_0_195x145 This video is used in the following articles:

2012 Cyclo-Cross Championship- bike swap

 

http://www.parktool.com/blog/calvins-corner/Madison_cyclocross_2012 View from the pits at the USA 2012 Cyclo-Cross Championship in Madison Wisconsin. First is the lead off lap of the Elite Men. The second part are some bike swaps during the Collegiate division.

Tagged: Riding bicycle cyclocross

KSIDsXVP4bI_0_195x145 This video is used in the following articles:

USAC Race Mechanic Clinic-2011-Wheel change session

 

USA Cycling hosts the Bill Woodul Race Mechanic Clinic. Mechanics attend 4 days of class on being a race mechanic. This are some out takes from the wheel change session.

Tagged: Wheel change

Za_SgFq6vDM_0_195x145 This video is used in the following articles:

Mont-Cenis - Last Ride & Conclusion

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes The final test ride for the Mont-Cenis.

Tagged:

VyvAJEdV6MI_0_195x145 This video is used in the following articles:

Mont-Cenis Chain Issue

 

http://www.parktool.com/blog/calvins-corner/reconditioning-older-bikes Compatibility issues with the chain and rear cogs of the Maillard hub

Tagged: