|
Untitled Document To use the tire lever or chain tool, remove the lever from tool body. Pull as see below. Re-install the lever by the reverse process. 
Pull lever to remove from tool.
There is a 8mm socket fitting in the middle of the lever that fits the chain tool plunger. Use this to drive the pin from the chain. For more detail on this service see chain installation. 
Use the socket fitting in the tire lever to drive the chain tool plunger.
The chain works like any other tool at this point.
.
The tire lever also includes two different sized spoke wrench fittings. For more detail on this service see wheel truing.
Use lever to true wheels.
The tire lever loosen the tire bead. Drag the lever around the rim to dislodge the bead fully.
The various hex wrench sizes are used to fix numerous components on the bike.
The 6mm hex also includes a removable 8mm hex wrench bit.
The screwdriver will allow derailleur adjustment.
The star shaped T-25 wrench fits the rotor bolts of the disc hubs.
|
