Item # 758.2
Reaming and Facing Cutter for 1.5 inch headset
The Park Tool 758.2 will ream and face the head tubes of bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer. Must also be used with the 750 Centering Cone Adaptor.
- 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
- Bores a machined surface to a depth of approximately 25mm and then faces top of headtube surface
SHIS terminology: The 758.2 is for EC49 upper and lower headtubes.
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.
North American Dealers