Item # 751.2
Head Tube Reamer for 1-inch Headset Standard
The 751.2 is a reamer for the HTR. It is sized to 30.1mm. The allows a 0.1mm interference fit when pressing the 30.2mm headset of the "euro" one-inch standard.
NOTE: For sharpening services of cutting tools see Park Tool Sharpening Services. Always use cutting fluid such as Park Tool CF-2 when machining.
SHIS terminology: The 751.2 is used on EC30 headtubes. If used on the EC29 headtube, it will ream it up to the EC30.
Where to BuyInternational Distributors|Online Retailers
North American Dealers
Compare Similar Products
Related Repair Articles:
Follow Calvin's Corner:
Packed with hundreds of photos and procedures, the
Learn bicycle repair from your local bike shop in this hands-on clinic. Find a local Park Tool School or Learn More.
