Home > Tools > Headset

Headset

Image Item # Part Name Description
Image Item # Part Name Description
Ad46d8a745944f7090f69e1c86a5544d87ae4a52_65x65
CF-2
Park Tool Cutting Fluid A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure. CF-2 Park Tool Cutting Fluid is an environmentally friendly, soy-based cutti...
2f919651ee2b6f16efb84e46b46896c9730fb51c_65x65
690
690 Replacement Facer The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1 and BTS-1.  The facer has an outside diameter of approximately 45mm. NOTE: For sharpening services of cutting tools see Pa...
6bb6ef23995b58a0cf11e1d991c24f462e3e64b7_65x65
690-XL
Oversized Replacement Facer The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also u...
3328c5d58c2aec51721f173bd8e5da8cd1dd29bb_65x65
690-XXL
Facing Cutter The 690-XXL is a facer for the large heatubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with #750 Centering Cone Adaptor and #789 Reamer or #790 Pilot when facing head tu...
9547c75b8bd59ca9b1032c93423eccfe2245e11f_65x65
750.2
Centering Cone Adaptor The 750.2 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Headtube Reaming and Facing Set. Several headset and bottom bracket standards  use inside diameters. Th...
997c4fab2cdefa0830034dad45bdeed911aee323_65x65
751.2
Head Tube Reamer for 1-inch Headset Standard The 751.2 is a reamer for the HTR. It is sized to 30.1mm. The allows a 0.1mm interference fit when pressing the 30.2mm headset of the "euro" one-inch standard. NOTE: For sharp...
Cf563e448e7ad347e5cc45045bdf70e53ea32bf8_65x65
754.2
33.9mm reamer for HTR The 754.2 is a reamer for the HTR. It is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1/8" standard. NOTE: For sharpening services o...
B632c473354f080379d3b04bf3607d8cae70568c_65x65
756s
Head Tube Cutter for IS headsets Reaming and Facing Cutters. Reams and faces head tubes that use integrated headset systems with a 41mm bearing and 45 degree angular contact, such as Cane Creek IS and others. Includes upper and...
959bf3d5259bc802052887d7e46c79c424af0721_65x65
758.2
Reaming and Facing Cutter for 1.5 inch headset The Park Tool 758.2 will ream and face the head tubes of bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and ...
600fc6813b3210841ff663f51883fb1f5aee2f45_65x65
761s
Reaming and Facing Cutter for Hiddenset Headsets The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FS...
B1e18a81c0cb8d530c27ab69a907d062f2932d40_65x65
767
Facing Pilot for OnePointFive headset standard The #767 is used with the HTR-1 (HTR-1B) and 690XL facer for a facing only option.  It is used with headtubes having an inside diameter of 49.8mm (the 1.5” standard).  SHIS t...
F7ed23937528a6f64242166ae5b8aa4e4ef98d0a_65x65
768
Pilot for ZS Headset (ZS44 or EC44) The #768 Pilot is used for a facing-only option with the "low profile" or "zero stack" headsets when used with the 690-XL facer. These headtubes are nominally 43.9mm ins...
518b90141d0bf9e2b6eafdc950f8d737db97d499_65x65
769
Head Tube Reamer Extension For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head t...
9ab01875fffddd75fa1346c4ae5b73bf718f0e0a_65x65
788
43.95mm Reamer Reams head tube I.D. to 43.95mm to accept “internal” headset cups with 44.05 - 44.10mm O.D.  (1-1/8 ZS standard).   Used with #690-XL Facing Cutter and #750 Centering ...
Bedde4ea141e9c27d9a47ab5523450ffdc21c84c_65x65
789
55.95mm Reamer Reams head tube I.D. to 55.95mm to accept “internal” headset cups with 56.00 - 56.10mm O.D.  (1-1/2 ZS standard).  Used with #690-XXL Facing Cutter and #750 Centering Cone ...
19922dea8558190566669e2c6ca7882aab7575e9_65x65
790
Pilot The 790 Pilot takes the place of the 789 Reamer for head tube facing with the HTR-1 Headtube Reamer. The 790 is used with the 690-XXL Facing Cutter and #750.2 Centering Cone Adaptor. The tool al...
168300c891b98a64a69a765fc46252f6df808c3e_65x65
822
Setscrew for TNS-1 and TNS-4 The 822 is the M6 replacement setscrew for the TNS-1 and TNS-4 Starfangled Nut Setter. The thread size matches the cap bolt theads of 6mm x 1mm.