Headset
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
SG-7.2 |
Oversized Saw Guide | Accurately guides a hacksaw to cut aero-shaped seat masts and seat posts up to 3.5” (89mm), as well as fork steerer tubes and other round tubes from 1-1/16” to 1-3/4” (27mm to ... |
 |
SG-8 |
Threadless Saw Guide for Carbon Composite Forks | Specially designed to accommodate wider, carbon specific saw blades, the SG-8 Saw Guide ensures a straight, clean cut on fork steerer tubes up to 1-1/4”. The SG-8 accomodates blades up to 2.5... |
 |
750.2 |
Centering Cone Adaptor | The 750.2 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Headtube Reaming and Facing Set. Several headset and bottom bracket standards use inside diameters. The... |
 |
758.2 |
Reaming and Facing Cutter for 1.5 inch headset | The Park Tool 758.2 will ream and face the head tubes of bike using the OnePointFive Interface Standard. The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Rea... |
 |
768 |
Pilot for ZS Headset (ZS44 or EC44) | The #768 Pilot is used for a facing-only option with the "low profile" or "zero stack" headsets when used with the 690-XL facer. These headtubes are nominally 43.9mm inside... |
 |
769 |
Head Tube Reamer Extension | For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head tube... |
 |
822 |
Setscrew for TNS-1 and TNS-4 | The 822 is the M6 replacement setscrew for the TNS-1 and TNS-4 Starfangled Nut Setter. The thread size matches the cap bolt theads of 6mm x 1mm. |
 |
CF-2 |
Park Tool Cutting Fluid | A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure. CF-2 Park Tool Cutting Fluid is an environmentally friendly, soy-based cutting ... |
 |
CRS-1 |
Crown Race Setting System | The CRS-1 offers a six inserts with to install the fork crown race. The bearing surface is spared a direct hit by using different inserts to ensure proper fit on the race. Choose the correct ... |
 |
HCW-15 |
Headset Wrench | Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by h... |
 |
HCW-6 |
Headset Wrench | Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by h... |
 |
HCW-7 |
Headset Wrench | Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by h... |
 |
HCW-9 |
Headset Wrench | Our popular and versatile Head Wrenches feature our proven “Y” head design and all headset wrench openings are lazer cut to ensure a tight, accurate fit. Precise sizing is achieved by h... |
 |
HHP-2 |
Bearing Cup Press | Park Tool has the answer to your headset and cartridge cup pressing needs. The HHP-2 accurately aligns and presses 1", 1-1/8", 1-1/4", and 1.5" headset cups. In addition, i... |
 |
HHP-3 |
Home Mechanic Bearing Cup Press | Simple and economical, the HHP-3 is designed to install all sizes of head cups (1" to 1-1/2") and one-piece bottom bracket cups. Will also press BB30 and BB90 (BB86, or BB92) system... |
 |
530-2 |
Step Bushing Cup Adaptors | These are the adaptors included with HHP-2, also available separately. Sold as a pair. For replacement or retrofit to older bearing press tools Adapts older HHPs to fit headcups for 1&q... |
