Home > Tools > Frame & Fork Tools

Frame & Fork Tools

Image Item # Part Name Description
Image Item # Part Name Description
B1e18a81c0cb8d530c27ab69a907d062f2932d40_65x65
767
Facing Pilot for OnePointFive headset standard The #767 is used with the HTR-1 (HTR-1B) and 690XL facer for a facing only option.  It is used with headtubes having an inside diameter of 49.8mm (the 1.5” standard).  SHIS t...
F7ed23937528a6f64242166ae5b8aa4e4ef98d0a_65x65
768
Pilot for ZS Headset (ZS44 or EC44) The #768 Pilot is used for a facing-only option with the "low profile" or "zero stack" headsets when used with the 690-XL facer. These headtubes are nominally 43.9mm ins...
518b90141d0bf9e2b6eafdc950f8d737db97d499_65x65
769
Head Tube Reamer Extension For use with the HTR-1 Head Tube Reaming and Facing Set, the #769 extends the reaming depth of reamers used in 1", 1-1/8" and 1-1/4" headset standards down to 27mm from the head t...
9ab01875fffddd75fa1346c4ae5b73bf718f0e0a_65x65
788
43.95mm Reamer Reams head tube I.D. to 43.95mm to accept “internal” headset cups with 44.05 - 44.10mm O.D.  (1-1/8 ZS standard).   Used with #690-XL Facing Cutter and #750 Centering ...
Bedde4ea141e9c27d9a47ab5523450ffdc21c84c_65x65
789
55.95mm Reamer Reams head tube I.D. to 55.95mm to accept “internal” headset cups with 56.00 - 56.10mm O.D.  (1-1/2 ZS standard).  Used with #690-XXL Facing Cutter and #750 Centering Cone ...
19922dea8558190566669e2c6ca7882aab7575e9_65x65
790
Pilot The 790 Pilot takes the place of the 789 Reamer for head tube facing with the HTR-1 Headtube Reamer. The 790 is used with the 690-XXL Facing Cutter and #750.2 Centering Cone Adaptor. The tool al...
48f1789c259d361ed1e15b167e95ee51b27ee24a_65x65
791
Reamer & Pilot Set for PF30 Bottom Bracket Shells The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the...
168300c891b98a64a69a765fc46252f6df808c3e_65x65
822
Setscrew for TNS-1 and TNS-4 The 822 is the M6 replacement setscrew for the TNS-1 and TNS-4 Starfangled Nut Setter. The thread size matches the cap bolt theads of 6mm x 1mm.