Frame & Fork Tools
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
CF-2 |
Park Tool Cutting Fluid | A quality cutting fluid should be used when performing any cutting, tapping, facing, threading, or reaming procedure. CF-2 Park Tool Cutting Fluid is an environmentally friendly, soy-based cutting ... |
 |
767 |
Facing Pilot for OnePointFive headset standard | The #767 is used with the HTR-1 (HTR-1B) and 690XL facer for a facing only option. It is used with headtubes having an inside diameter of 49.8mm (the 1.5” standard). SHIS termino... |
 |
761s |
Reaming and Facing Cutter for Hiddenset Headsets | The 761s Reaming and Facing Cutters are used to machine head tubes using integrated headsets with a 42 mm bearing and 45 degree angular contact used by the Campagnolo® Hiddenset standard. FSA&r... |
 |
756s |
Head Tube Cutter for IS headsets | Reaming and Facing Cutters. Reams and faces head tubes that use integrated headset systems with a 41mm bearing and 45 degree angular contact, such as Cane Creek IS and others. Includes upper and lo... |
 |
754.2 |
33.9mm reamer for HTR | The 754.2 is a reamer for the HTR. It is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1/8" standard. NOTE: For sharpening services of cutt... |
 |
751.2 |
Head Tube Reamer for 1-inch Headset Standard | The 751.2 is a reamer for the HTR. It is sized to 30.1mm. The allows a 0.1mm interference fit when pressing the 30.2mm headset of the "euro" one-inch standard. NOTE: For sharpening ... |
 |
690-XL |
Oversized Replacement Facer | The #690-XL is a larger version of the 690 facer for the HTR Headtube Facer and Reamer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used... |
 |
690 |
690 Replacement Facer | The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1 and BTS-1. The facer has an outside diameter of approximately 45mm. NOTE: For sharpening services of cutting tools see Park Too... |
 |
TNS-15 |
Threadless Nut Setter | The Threadless Nut Setter TNS-15 is used for the 1¼" and 1.5” threadless headset systems. Thread the nut onto the TNS-15, insert into the fork stack, and tap it in with a hammer. ... |
 |
SG-2 |
Threaded Saw Guide | Cut any 1-1/8" fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset parts install e... |
 |
SG-1 |
Threaded Saw Guide | Cut any threaded one-inch fork quickly and easily with these handy fork stack cutting guides. Heat treated for long life, each guide cleans the freshly cut threads upon removal so headset par... |
 |
HTR-1B |
Head Tube Reaming and Facing Set | Proper frame preparation is very important. The HTR-1B combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. HTR-1B comes with a reamer of 33.9mm for the... |
 |
HTR-1 |
Head Tube Reaming and Facing Set | Proper frame preparation is very important. The HTR-1 combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes 30.1 mm reamer (part #751.2) ... |
 |
FTS-1 |
Fork Threading Set | The FTS-1 Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest... |
 |
FFS-2 |
Frame and Fork Straightener | Used to straighten frames, forks, and other components, the Park Tool Handlebar and Subframe Straightener is a versatile and productive tool. The open hook design enables it to straighten not only ... |
 |
FFG-2 |
Frame and Fork End Alignment Gauge Set | Improperly aligned frame or fork dropouts can cause bent axles and quick release skewers, as well as tracking and shifting problems. The FFG-2 quickly determines whether rear frame or front fork d... |
 |
FAG-2 |
Frame Alignment Gauge | Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat sta... |
 |
CRS-15 |
Crown Race Setter for 1.5 inch column | The CRS-15 uses two different insert rings to install bearing races on the 1.5" and 1-1/4" forks. The bearing surface is spared a direct hit by using an aluminum inserts. Using a hammer... |
 |
CRC-1 |
Crown Race Cutting Tool | To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. The CRC-1 is a professional quality machining tool for mi... |
 |
750.2 |
Centering Cone Adaptor | The 750.2 Centering Cone Adaptor increase the size of the centering cone of the HTR-1 Headtube Reaming and Facing Set. Several headset and bottom bracket standards use inside diameters. The... |
 |
691 |
1.370" x 24 Right Hand Threaded English Tap | The 691 is a replacement tap for the BTS-1 Bottom Bracket Tap Set in the 1.370" x 24 TPI right hand threading standard. This tap is used on the non-drive or left side of the bike. This si... |
 |
790 |
Pilot | Used with the 690-XXL Facing Cutter and #750 Centering Cone Adaptor when facing head tubes with 55.95 – 55.90mm I.D. (“Internal” 1-1/2” ZS standard). SIS terminology: ... |
 |
789 |
55.95mm Reamer | Reams head tube I.D. to 55.95mm to accept “internal” headset cups with 56.00 - 56.10mm O.D. (1-1/2 ZS standard). Used with #690-XXL Facing Cutter and #750 Centering Cone Ada... |
 |
788 |
43.95mm Reamer | Reams head tube I.D. to 43.95mm to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). Used with #690-XL Facing Cutter and #750 Centering Con... |
