Crank Tools
| Image | Item # | Part Name | Description |
|---|---|---|---|
| Image | Item # | Part Name | Description |
 |
HT-10 |
10mm Hex Tool | Specially designed for cranks, including the Campagnolo® Ultra-Torque, the HT-10 hex tool is designed and built for speed, leverage and comfort. HT tools feature an ergonomically designed screw... |
 |
SPA-6 |
Adjustable Spanner | This spanner uses hardened, replaceable pins approximately 2.2mm in diameter. Designed for heavy duty use, the distance between the pins is adjustable, allowing use on virtually all hanger cups u... |
 |
BBT-10 |
Adjusting Cap Tool | The BBT-10 is a shop quality tool designed to remove and install the adjusting caps on Shimano Hollowtech II crank/bottom bracket systems. Made from investment cast steel, the BBT-10 provides the s... |
 |
HT-8 |
8mm Hex Tool | Specially designed for cranks and pedals, our new HT-8 hex tool is designed and built for speed, leverage and comfort. Perfect for changing rear sprockets or splitting cases. HT tools feature an er... |
 |
CCW-5 |
Crank Wrench | The CCW-5 features both a 14mm socket and 8mm hex wrench on a long, comfortable handle. Packaged carded: CCW-5C |
 |
CCP-44 |
Crank Puller for Splined Cranks | The CCP-44 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Specifically designed to remove crank arms from splined ... |
 |
CCP-22 |
Crank Puller for Square Taper Cranks | The CCP-22 uses a long comfortable handle and extra fine thread that provides the needed leverage to remove even the tightest cranks. Fits all cranks using 22mm x 1 threads and square, taper... |
 |
SPA-2 |
Pin Spanner: Red | Park Tool Pin Spanners have been designed to give maximum usefulness and versatility at the lowest possible cost. Tough, high carbon tool steel is used on each tool to ensure long life. Handle is v... |
 |
PH-10 |
10mm P-Handle Hex Wrench | These thoughtfully designed P-handled hex wrenches fit the task at hand, and they fit in your hand too. The hex wrenches are made from high torque industrial steel and through hardened for long ... |
 |
HR-8 |
8mm Hex Wrench | A long-handled L-shaped wrench for installing and removing crank bolts with an 8mm socket. Made from industrial grade Bondhus Protanium high torque steel Includes a "ball-tip&quo... |
 |
HCW-5 |
Crank and Bottom Bracket Wrench | Double sided bottom bracket lockring hook spanner. One side is a single hook, the other is a hook spanner with 3 notches for better engagement in the lockrings. The three-hook end will fit 3-notch ... |
 |
HCW-4 |
Crank and Bottom Bracket Wrench | Our popular and versatile Crank Wrenches feature our proven “Y” head design. 36mm box-end and bottom bracket pin spanner. Center to center measurment between pins is 29mm. Pin di... |
 |
CWP-7 |
Universal Crank Puller for Square Taper and Splined Cranks | The universal design of the CWP-7 has a rotating tip pressed into each end of the tool (11.3mm and 16.3mm) so it will remove both square taper and splined (ISIS Drive, Octalink) crank arms. The ... |
 |
CNW-2 |
Chainring Nut Wrench | The CNW-2 makes chainring bolt set installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. Double-ended to fit most slotted-typ... |
 |
CBP-5 |
Campagnolo® Power-Torque™ Crank and Bearing Adaptor Set | The CBP-5 is used in conjunction with the CBP-3 set to remove and install Power-Torque™ crank arms and right side crank bearings. The CBP-5 includes: Crank and crank bearing removal ... |
