Repair Help

Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).

1-10 of 20 Articles Found

Bottom Bracket Standards

There are now several different crank bearing systems and standards. The different standards do not allow interchangeability between bearings or cranksets. Having some knowledge of the standard will help the mechanic be aware of service options.


Rear Derailleur Adjustment

The article will discuss adjustment of rear derailleur limit screws and indexing.


Front Derailleur Adjustment

This article will discuss the basic adjustment of the front derailleur. This article assumes the derailleur is compatible with the shifting system and is not extremely worn out.


Rear Derailleur Hanger Alignment

This article will discuss derailleur hanger alignment and use of the DAG-2.2 and DAG-2 Derailleur Alignment Gauge.


Cutting and Sizing Cable Housing

This article will discuss the cutting and sizing of derailleur cable housing.


Di2 Shimano® Electronic Intelligent System Installation

This article will discuss the installation and adjustment of the Di2 Shimano Electronic Intelligent System®. This system is incorporated in the designs of some new bike models. This article will focus on the installation of the system as an after-market component system.


Bar End Shifter Service

This article will discuss bar end shifters, often found on the ends of time trial or triathlon handlebars.


Rear Derailleur Overhaul

This article will discuss the overhaul of rear derailleurs and pulleys.


Bottom Bracket Service: PF30

This article reviews bearing removal and installation for PF30 press fit bottom brackets.


Bottom Bracket Service: Cartridge Type

This article will discuss the removal and installation of the common cartridge bottom brackets of the three-piece cranksets.


Next Page
Filter by Category
Topics