Repair Help

Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).

1-10 of 13 Articles Found

Cutter Selection Guide for Reaming, Tapping & Facing

This article contains an array of tables to assist in choosing the correct tools, cutters and spacers when reaming, tapping, or facing bicycle frames. The products referenced in this article can be found under the Frame & Fork Tools category.


Rear Derailleur Hanger Alignment

This article will discuss derailleur hanger alignment and use of the DAG-2.2 and DAG-2 Derailleur Alignment Gauge.


Fork Steering Column Length and Sizing

This article will discuss cutting and sizing of bicycle forks.


Water Bottle Fittings

This article will discuss the service of built-in water bottle fittings.


RockShox® Pike® Suspension Fork Service

This article will review the service of the RockShox® Pike® suspension fork.


RockShox® Rear Shock Service—Monarch 4.2

This article will review the service of the RockShox® Monarch rear shock.


Dropout Alignment

This article will discuss alignment of rear wheel dropouts and fork dropouts.


Frame Alignment

This article will discuss frame alignment and the use of the FAG-2 Frame Alignment Gauge. Frame alignment issues and repairs are best addressed by professional mechanics and frame builders. If your frame does not ride quite "right," it is worth having the alignment checked by these professionals.


Threading Fork Steering Columns with FTS-1

This article will discuss the FTS-1 Fork Threader and how to properly use it to thread forks.


Post Mount Disc Brake Facing with DT-4

This article will review the use of the DT-4 Disc Mount Post Facing Tool (discontinued).


Next Page
Filter by Category
Topics