This article will discuss the removal and installation of tires.
This thread will discuss the correct procedure for installing and removing bike pedals.
This article will discuss the removal and installation of crankarms on the round, splined type spindles. These are the ISIS Drive® or Shimano® Octalink types.
This article with discuss the use of the CRP-1 Crown Race Puller.
This article will discuss the use of the BBT-18 (or older BBT-8) to remove some crankset spider lockrings.
This article will discuss the removal and installation of cranks from square spindle bottom brackets. Crank pullers are used for two basic crank types: the square spindle type arms, and the splined type spindle arms.
If the removal threads for the crankarm puller in the crankarm are damaged, there is a possible repair. You will need a Bicycle Research TC-8, which is a fluted bolt that cleans the threads. It comes with a pivoting stud to align the tool concentric to the threads.
This article will discuss the service of freehubs. Shimano, American Classic, Campagnolo, and Bontrager freehub removal will be reviewed