Repair Help

Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).

11-15 of 15 Articles Found

Generational Changes in Repair Stands

This article will discuss the generational changes in repair stands. There have been running changes made through the years on several models. Some models are now discontinued. Find parts diagrams for these and virtually all other repair stands we have produced in the product documentation library.


PFP-5 Floor Pump Service

This article will discuss the service of the PFP-5 Home Mechanic Floor Pump (discontinued)


PFP-4 and PFP-2 Service

This article will discuss the service of the PFP-4 and PFP-2 Professional Floor Pump (both discontinued).


PFP-6 and PFP-3 Service

This article will discuss the service of the PFP-6 Home Mechanic Floor Pump and the PFP-3 Floor Pump (both discontinued).


TS-2.2 and TS-2 Centering

This article will discuss the centering procedures for the TS-2 and TS-2.2 Professional Wheel Truing Stands. The same procedures and concepts apply to both stands.

The TS-2.2 truing stand is adjusted at the factory to center the rim between the calipers. With use, the TS-2.2 can come out of center. For precision work, the TS-2.2 and TS-2 are intended to be used with a dishing tool, such as the Park Tool WAG-4 or WAG-5. See these tools discussed in the article: Wheel Dishing or Centering


Previous Page
Filter by Category
Topics