Home > Repair Help and Education
Repair Help and Education
Posts in Category "Frame & Fork Tools"
Post Mount Disc Brake Facing with DT-4
Use of the DT-4 Disc Mount Post Facing Tool
Threading Fork Steering Columns- FTS-1 use
This article will discuss the FTS-1 Fork Threader and how to properly use it to... thread forks.
Headtube Reaming and Facing
This article will discuss the reaming and facing of the head tube.
Frame Alignment
This article will discuss frame alignment and the use of the Frame Alignment Gauge FAG-2.
RockShox Rear Shock Service- Monarch 4.2
This article will review the service of the RockShox® Monarch rear shock. Rear shocks are found on most full suspension bikes.
Rock Shox Pike Suspension Fork Service
This article will review the service of the Rock Shox® Pike suspension fork. Suspension systems are sophisticated technology and service often requires proprietary tools and specialized knowledge.
Bottom Bracket Tapping, Threading, Chasing and Facing
This article will discuss use of the Park Tool BTS-1 and the Park Tool BFS-1.
Chainline Concepts
This article with discuss the use of the CLG-2 chainline Gauge and the concept of chainline.
Fork Crown Race Cutting and Facing
This article will discuss the machining of the fork crown seat.
Dropout Alignment
This article will discuss alignment of rear wheel dropouts and fork dropouts.
Fork Steering Column Length and Sizing
This article will discuss cutting and sizing of bicycle forks.
- Displaying 1 - 13 of 13
